These are the instructions to download Flash or install Stock Firmware (ROM) on Motorola Z Play (clone) (Original firmware) , If you searching for the Motorola Z Play (clone) Stock ROM then you are at the right place. Here i will guide you to install official stock Rom on Motorola Z Play (clone) , Here you can download the Official Motorola Z Play (clone) Stock Firmware ROM (flash file) on your Computer
Download Motorola Z Play (clone) Stock Rom (Original firmware)
Requirements: Your Motorola Z Play (clone) Device should have at least 40-50 percent of battery to perform the Flashing Process.
Flash File Name: Motorola_Z_Play_Clone_MT6580_20180421_5.1-[flash-file.net].zip
Flash File Size: 683 MB
Flash Tool Link: SP Flash Tool For Windows | SP Flash Tool For linux
How to Flash Stock Firmware ROM on Motorola Z Play (clone)
To install the Stock Firmware on Motorola Z Play (clone) , Please follow the guide and download the Rom . This guide is for How to Install Stock ROM on Motorola Z Play (clone) .
STEP 1: Download and Install the Motorola Z Play (clone) USB Driver on your computer. In case you have already installed them, you can skip this step.
STEP 2: Switch Off your Motorola Z Play (clone) device .
STEP 3: After downloading Stock Firmware , extract the zip file on your system.
STEP 4: Download the SP Flash Tool on your system and extract the downloaded zip file on your system. After that you can see the following files listed. STEP 5: Form the files listed run the Flash_tool.exe file.
STEP 6: Once the SP Flash tool is started, click on the Scatter-Loading button located in the right side. STEP 7: Now locate the scatter file in your stock ROM. It is generally located in the bin/ directory. STEP 8: Now click the Download button to start the downloading process. STEP 9: After completed all the above steps, connect your Motorola Z Play (clone) to your system using the USB cable and , press any button other than power button so that your system will detect your Motorola Z Play (clone) Device. You can use volume buttons. Step 10: Once the flashing process is completed, a green ring will appear on your system. Now disconnect your Motorola Z Play (clone) and switch it ON.Congratulations, Now you have successfully flashed the stock firmware on your Motorola Z Play (clone) using SP Flash Tool.
Keep in mind:
[*] Motorola Z Play (clone) Flash Tool: If you need to download the latest version of SP Flash Tool, then head over to SP Flash Tool For Windows or SP Flash Tool For linux .
[*] Backup Please: Take a backup of your important data before Flashing Motorola Z Play (clone) Stock Firmware as because during the flashing process your personal data will be removed permanently.
[*] Broken link Report here.
[*] ROOT Motorola Z Play (clone):If you would like to know how to root your Motorola Z Play (clone) android device, drop a comment below. We will share the tutorial for your device as quickly as possible .