How To Flash Stock Rom Firmware On Multilaser M10

These are the instructions to download Flash or install Stock Firmware (ROM) on Multilaser M10 (Original firmware) , If you searching for the Multilaser M10 Stock ROM then you are at the right place. Here i will guide you to install official stock Rom on Multilaser M10 , Here you can download the Official Multilaser M10 Stock Firmware ROM (flash file) on your Computer

Download Multilaser M10 Stock Rom (Original firmware)

Requirements: Your Multilaser M10 Device should have at least 40-50 percent of battery to perform the Flashing Process.

Flash File Name: Multilaser_M10_V1_NB053-[flash-file.net].zip
Flash File Size: 354 MB
Flash Tool Link: RockChip Batch Tool

Download Flash File

---

Flash File Name: Multilaser_M10_V2_151013_LS-[flash-file.net].zip
Flash File Size: 344 MB
Flash Tool Link: LiveSuit Tool

Download Flash File

How to Flash Stock Firmware ROM on Multilaser M10

To install the Stock Firmware on Multilaser M10 , Please follow the guide and download the Rom . This guide is for How to Install Stock ROM on Multilaser M10 .

Step 1: Download and install Rockchip Driver Assistant on your computer. Step 2: Download and extract RockChip Batch Tool on your computer. After Extracting you will be able to see the following files: Step 3: Now open RKBatchTool.exe from the extracted files. Step 4: Once RKBatchTool.exe is launched, Click on the Box right to the FW Path.   Step 5: Once you have succesfully added the firmware, RockChip Tool will load it. Step 6: Now, Turn Off your Multilaser M10 Device and tablets. Step 7: Now, Press and Hold Volume UP Key on your Multilaser M10 Device and connect it to the computer using the USB cable.

Step 8: Do not release the Volume UP Key on your Multilaser M10 Device until Icon 1 turns Green in Color. Step 9: Once your Multilaser M10 Device is successfully added to the computer, Click on the Restore Button to begin the Flashing process. Step 10: Now, RockChip Batch Tool will Flash the Firmware on your Multilaser M10 Device (flashing usually takes 4-6 minutes to complete).

Step 13: Once Flashing is completed successfully then you will be able to see Restore Done Success Message. Step 14: Now, close RockChip Batch Tool by clicking on the Exit Button.

  Step 15: Disconnect your Multilaser M10 Device from the Computer and Restart it.

Congratulations, Now you have successfully flashed the stock firmware on your Multilaser M10 using RockChip Batch Tool.

Keep in mind:

[*] Multilaser M10 Flash Tool: If you need to download the latest version of RockChip Batch Tool, then head over to RockChip Batch Tool .

[*] Backup Please: Take a backup of your important data before Flashing Multilaser M10 Stock Firmware as because during the flashing process your personal data will be removed permanently.

[*] Broken link Report here.

[*] ROOT Multilaser M10:If you would like to know how to root your Multilaser M10 android device, drop a comment below. We will share the tutorial for your device as quickly as possible .