These are the instructions to download Flash or install Stock Firmware (ROM) on Newman K1W (Original firmware) , If you searching for the Newman K1W Stock ROM then you are at the right place. Here i will guide you to install official stock Rom on Newman K1W , Here you can download the Official Newman K1W Stock Firmware ROM (flash file) on your Computer.
DownloadNewman K1W Stock Rom (Original firmware)
Requirements: Your Newman K1W Device should have at least 40-50 percent of battery to perform the Flashing Process.
Flash File Name: Newman_K1W_MT6572_130323_4.2.2-[flash-file.net].zip
Flash File Size: 444 MB
Flash Tool Link: SP Flash Tool For Windows | SP Flash Tool For linux
Flash File Name: Newman_K1W_MT6572_140413_4.2.2-[flash-file.net].zip
Flash File Size: 444 MB
Flash Tool Link: SP Flash Tool For Windows | SP Flash Tool For linux
How to Flash Stock Firmware ROM on Newman K1W
To install the Stock Firmware on Newman K1W , Please follow the guide and download the Rom . This guide is for How to Install Stock ROM on Newman K1W .
STEP 1: Download and Install the Newman K1W USB Driver on your computer. In case you have already installed them, you can skip this step.
STEP 2: Switch Off your Newman K1W device .
STEP 3: After downloading Stock Firmware , extract the zip file on your system.
STEP 4: Download the SP Flash Tool on your system and extract the downloaded zip file on your system. After that you can see the following files listed. STEP 5: Form the files listed run the Flash_tool.exe file.
STEP 6: Once the SP Flash tool is started, click on the Scatter-Loading button located in the right side. STEP 7: Now locate the scatter file in your stock ROM. It is generally located in the bin/ directory. STEP 8: Now click the Download button to start the downloading process. STEP 9: After completed all the above steps, connect your Newman K1W to your system using the USB cable and , press any button other than power button so that your system will detect your Newman K1W Device. You can use volume buttons. Step 10: Once the flashing process is completed, a green ring will appear on your system. Now disconnect your Newman K1W and switch it ON.Congratulations, Now you have successfully flashed the stock firmware on your Newman K1W using SP Flash Tool.
Keep in mind:
[*] Newman K1W Flash Tool: If you need to download the latest version of SP Flash Tool, then head over to SP Flash Tool For Windows or SP Flash Tool For linux .
[*] Backup Please: Take a backup of your important data before Flashing Newman K1W Stock Firmware as because during the flashing process your personal data will be removed permanently .
[*] Broken link Report here.
[*] ROOT Newman K1W:If you would like to know how to root your Newman K1W android device, drop a comment below. We will share the tutorial for your device as quickly as possible .