Flash Guide How to Flash a ROM to Your Android Phone
These are the instructions to download Flash or install Stock Firmware (ROM) on Newman K3 JB (Original firmware) , If you searching for the Newman K3 JB Stock ROM then you are at the right place. Here i will guide you to install official stock Rom on Newman K3 JB , Here you can download the Official Newman K3 JB Stock Firmware ROM (flash file) on your Computer.
DownloadNewman K3 JB Stock Rom (Original firmware)
Requirements: Your Newman K3 JB Device should have at least 40-50 percent of battery to perform the Flashing Process.
Flash File Name: Newman_K3_JB_MT6592_140513_4.2.2-[flash-file.net].zip
Flash File Size: 474 MB
Flash Tool Link: SP Flash Tool For Windows | SP Flash Tool For linux
How to Flash Stock Firmware ROM on Newman K3 JB
To install the Stock Firmware on Newman K3 JB , Please follow the guide and download the Rom . This guide is for How to Install Stock ROM on Newman K3 JB .
STEP 1: Download and Install the Newman K3 JB USB Driver on your computer. In case you have already installed them, you can skip this step.
STEP 2: Switch Off your Newman K3 JB device .
STEP 3: After downloading Stock Firmware , extract the zip file on your system.
STEP 4: Download the SP Flash Tool on your system and extract the downloaded zip file on your system. After that you can see the following files listed.
STEP 5: Form the files listed run the Flash_tool.exe file.
STEP 6: Once the SP Flash tool is started, click on the Scatter-Loading button located in the right side. 
STEP 7: Now locate the scatter file in your stock ROM. It is generally located in the bin/ directory. STEP 8: Now click the Download button to start the downloading process. 
STEP 9: After completed all the above steps, connect your Newman K3 JB to your system using the USB cable and , press any button other than power button so that your system will detect your Newman K3 JB Device. You can use volume buttons. 
Step 10: Once the flashing process is completed, a green ring will appear on your system. Now disconnect your Newman K3 JB and switch it ON.
Congratulations, Now you have successfully flashed the stock firmware on your Newman K3 JB using SP Flash Tool.
Keep in mind:
[*] Newman K3 JB Flash Tool: If you need to download the latest version of SP Flash Tool, then head over to SP Flash Tool For Windows or SP Flash Tool For linux .
[*] Backup Please: Take a backup of your important data before Flashing Newman K3 JB Stock Firmware as because during the flashing process your personal data will be removed permanently .
[*] Broken link Report here.
[*] ROOT Newman K3 JB:If you would like to know how to root your Newman K3 JB android device, drop a comment below. We will share the tutorial for your device as quickly as possible .
