How To Flash Stock Rom Firmware On Pulid S6 One Max

These are the instructions to download Flash or install Stock Firmware (ROM) on Pulid S6 One Max (Original firmware) , If you searching for the Pulid S6 One Max Stock ROM then you are at the right place. Here i will guide you to install official stock Rom on Pulid S6 One Max , Here you can download the Official Pulid S6 One Max Stock Firmware ROM (flash file) on your Computer

Download Pulid S6 One Max Stock Rom (Original firmware)

Requirements: Your Pulid S6 One Max Device should have at least 40-50 percent of battery to perform the Flashing Process.

Flash File Name: Pulid_S6_One_Max_MT6589_20130925_4.2.1-[flash-file.net].zip
Flash File Size: 521 MB
Flash Tool Link: SP Flash Tool For Windows | SP Flash Tool For linux

Download Flash File

How to Flash Stock Firmware ROM on Pulid S6 One Max

To install the Stock Firmware on Pulid S6 One Max , Please follow the guide and download the Rom . This guide is for How to Install Stock ROM on Pulid S6 One Max .

STEP 1: Download and Install the Pulid S6 One Max USB Driver on your computer. In case you have already installed them, you can skip this step.

STEP 2: Switch Off your Pulid S6 One Max device .

STEP 3: After downloading Stock Firmware , extract the zip file on your system.

STEP 4: Download the SP Flash Tool on your system and extract the downloaded zip file on your system. After that you can see the following files listed. STEP 5: Form the files listed run the Flash_tool.exe file.

STEP 6: Once the SP Flash tool is started, click on the Scatter-Loading button located in the right side. STEP 7: Now locate the scatter file in your stock ROM. It is generally located in the bin/ directory. STEP 8: Now click the Download button to start the downloading process. STEP 9: After completed all the above steps, connect your Pulid S6 One Max to your system using the USB cable and , press any button other than power button so that your system will detect your Pulid S6 One Max Device. You can use volume buttons. Step 10: Once the flashing process is completed, a green ring will appear on your system. Now disconnect your Pulid S6 One Max and switch it ON.Congratulations, Now you have successfully flashed the stock firmware on your Pulid S6 One Max using SP Flash Tool.

Keep in mind:

[*] Pulid S6 One Max Flash Tool: If you need to download the latest version of SP Flash Tool, then head over to SP Flash Tool For Windows or SP Flash Tool For linux .

[*] Backup Please: Take a backup of your important data before Flashing Pulid S6 One Max Stock Firmware as because during the flashing process your personal data will be removed permanently.

[*] Broken link Report here.

[*] ROOT Pulid S6 One Max:If you would like to know how to root your Pulid S6 One Max android device, drop a comment below. We will share the tutorial for your device as quickly as possible .