These are the instructions to download Flash or install Stock Firmware (ROM) on Puncher S10 Plus (Original firmware) , If you searching for the Puncher S10 Plus Stock ROM then you are at the right place. Here i will guide you to install official stock Rom on Puncher S10 Plus , Here you can download the Official Puncher S10 Plus Stock Firmware ROM (flash file) on your Computer.
DownloadPuncher S10 Plus Stock Rom (Original firmware)
Requirements: Your Puncher S10 Plus Device should have at least 40-50 percent of battery to perform the Flashing Process.
Flash File Name: Puncher_S10_Plus_SC6820_20171016_2.3.5_SPD-[flash-file.net].zip
Flash File Size: 143 MB
Flash Tool Link: SPD Flash Tool
How to Flash Stock Firmware ROM on Puncher S10 Plus
To install the Stock Firmware on the Puncher S10 Plus , Please follow the guide and download the Rom . This guide is for How to Install Stock ROM on Puncher S10 Plus .
Step 1: Download and Install Puncher S10 Plus USB Driver on your Computer. If in case Spreadtrum Driver is already installed on your computer then SKIP this Step.
Step 2: After Download Stock Rom (pac) for your Puncher S10 Plus Device.
Step 3: Download and extract Spreadtrum Upgrade Tool on your computer. After extracting, you will be able to see the following files: Step 4: Now, open UpgradeDownload.exe. Step 5: Once Spreadtrum Upgrade Tool is launched, connect your Puncher S10 Plus Device to the computer (make sure your Android Device is switch off).
Step 6: Once your Puncher S10 Plus is connected successfully to the computer, click on the Load Packed Button and add the .pac file (stock rom which comes as .pac). Step 7: Once you have successfully added the Pac file in Spreadtrum Upgrade Tool, click on the Start Downloading button to begin the flashing.
Step 8: During the flashing process your Puncher S10 Plus Device will restart automatically. Once flashing is completed, you will be able to see the Green Passed Message in Spreadtrum Upgrade Tool.
Step 9: Now you have successfully flashed your Puncher S10 Plus using Spreadtrum Upgrade Tool. Once your Puncher S10 Plus Device is successfully restarted, Go to Settings About Phone Check firmware..
Congratulations, Now you have successfully flashed the stock firmware on your Puncher S10 Plus using Spreadtrum Upgrade Tool
Keep in mind:
[*] Puncher S10 Plus Flash Tool: If you need to download the latest version of SPD Flash Tool, then head over to SPD Flash Tool for WINDOWS .
[*] Backup Please: Take a backup of your important data before Flashing Puncher S10 Plus Stock Firmware as because during the flashing process your personal data will be removed permanently .
[*] Broken link Report here.
[*] ROOT Puncher S10 Plus:If you would like to know how to root your Puncher S10 Plus android device, drop a comment below. We will share the tutorial for your device as quickly as possible .