How To Flash Stock Rom Firmware On Sansui SA41

These are the instructions to download Flash or install Stock Firmware (ROM) on Sansui SA41 (Original firmware) , If you searching for the Sansui SA41 Stock ROM then you are at the right place. Here i will guide you to install official stock Rom on Sansui SA41 , Here you can download the Official Sansui SA41 Stock Firmware ROM (flash file) on your Computer

Download Sansui SA41 Stock Rom (Original firmware)

Requirements: Your Sansui SA41 Device should have at least 40-50 percent of battery to perform the Flashing Process.

Flash File Name: Sansui_SA41_20130318_V2.08_update-[flash-file.net].zip
Flash File Size: 139 MB
Flash Tool Link: SPD Flash Tool

Download Flash File

---

Flash File Name: Sansui_SA41_20130508_V2.10_update-[flash-file.net].zip
Flash File Size: 113 MB
Flash Tool Link: SPD Flash Tool

Download Flash File

How to Flash Stock Firmware ROM on Sansui SA41

To install the Stock Firmware on Sansui SA41 , Please follow the guide and download the Rom . This guide is for How to Install Stock ROM on Sansui SA41 .

Step 1: Download and Install Sansui SA41 USB Driver on your Computer. If in case Spreadtrum Driver is already installed on your computer then SKIP this Step.

Step 2: After Download Stock Rom (pac) for your Sansui SA41 Device.

Step 3: Download and extract Spreadtrum Upgrade Tool on your computer. After extracting, you will be able to see the following files: Step 4: Now, open UpgradeDownload.exe. Step 5: Once Spreadtrum Upgrade Tool is launched, connect your Sansui SA41 Device to the computer (make sure your Android Device is switch off).

Step 6: Once your Sansui SA41 is connected successfully to the computer, click on the Load Packed Button and add the .pac file (stock rom which comes as .pac). Step 7: Once you have successfully added the Pac file in Spreadtrum Upgrade Tool, click on the Start Downloading button to begin the flashing.

Step 8: During the flashing process your Sansui SA41 Device will restart automatically. Once flashing is completed, you will be able to see the Green Passed Message in Spreadtrum Upgrade Tool.

Step 9: Now you have successfully flashed your Sansui SA41 using Spreadtrum Upgrade Tool. Once your Sansui SA41 Device is successfully restarted, Go to Settings About Phone Check firmware..

Congratulations, Now you have successfully flashed the stock firmware on your Sansui SA41 using Spreadtrum Upgrade Tool

Keep in mind:

[*] Sansui SA41 Flash Tool: If you need to download the latest version of SPD Flash Tool, then head over to SPD Flash Tool .

[*] Backup Please: Take a backup of your important data before Flashing Sansui SA41 Stock Firmware as because during the flashing process your personal data will be removed permanently.

[*] Broken link Report here.

[*] ROOT Sansui SA41:If you would like to know how to root your Sansui SA41 android device, drop a comment below. We will share the tutorial for your device as quickly as possible .