How To Flash Stock Rom Firmware On Sansui SA42G

These are the instructions to download Flash or install Stock Firmware (ROM) on Sansui SA42G (Original firmware) , If you searching for the Sansui SA42G Stock ROM then you are at the right place. Here i will guide you to install official stock Rom on Sansui SA42G , Here you can download the Official Sansui SA42G Stock Firmware ROM (flash file) on your Computer

Download Sansui SA42G Stock Rom (Original firmware)

Requirements: Your Sansui SA42G Device should have at least 40-50 percent of battery to perform the Flashing Process.

Flash File Name: Sansui_SA42G_V1.0_20130929-[flash-file.net].zip
Flash File Size: 141 MB
Flash Tool Link: SPD Flash Tool

Download Flash File

How to Flash Stock Firmware ROM on Sansui SA42G

To install the Stock Firmware on Sansui SA42G , Please follow the guide and download the Rom . This guide is for How to Install Stock ROM on Sansui SA42G .

Step 1: Download and Install Sansui SA42G USB Driver on your Computer. If in case Spreadtrum Driver is already installed on your computer then SKIP this Step.

Step 2: After Download Stock Rom (pac) for your Sansui SA42G Device.

Step 3: Download and extract Spreadtrum Upgrade Tool on your computer. After extracting, you will be able to see the following files: Step 4: Now, open UpgradeDownload.exe. Step 5: Once Spreadtrum Upgrade Tool is launched, connect your Sansui SA42G Device to the computer (make sure your Android Device is switch off).

Step 6: Once your Sansui SA42G is connected successfully to the computer, click on the Load Packed Button and add the .pac file (stock rom which comes as .pac). Step 7: Once you have successfully added the Pac file in Spreadtrum Upgrade Tool, click on the Start Downloading button to begin the flashing.

Step 8: During the flashing process your Sansui SA42G Device will restart automatically. Once flashing is completed, you will be able to see the Green Passed Message in Spreadtrum Upgrade Tool.

Step 9: Now you have successfully flashed your Sansui SA42G using Spreadtrum Upgrade Tool. Once your Sansui SA42G Device is successfully restarted, Go to Settings About Phone Check firmware..

Congratulations, Now you have successfully flashed the stock firmware on your Sansui SA42G using Spreadtrum Upgrade Tool

Keep in mind:

[*] Sansui SA42G Flash Tool: If you need to download the latest version of SPD Flash Tool, then head over to SPD Flash Tool .

[*] Backup Please: Take a backup of your important data before Flashing Sansui SA42G Stock Firmware as because during the flashing process your personal data will be removed permanently.

[*] Broken link Report here.

[*] ROOT Sansui SA42G:If you would like to know how to root your Sansui SA42G android device, drop a comment below. We will share the tutorial for your device as quickly as possible .