How To Flash Stock Rom Firmware On Seete X7TS

These are the instructions to download Flash or install Stock Firmware (ROM) on Seete X7TS (Original firmware) , If you searching for the Seete X7TS Stock ROM then you are at the right place. Here i will guide you to install official stock Rom on Seete X7TS , Here you can download the Official Seete X7TS Stock Firmware ROM (flash file) on your Computer.

Download Seete X7TS Stock Rom (Original firmware)

Requirements: Your Seete X7TS Device should have at least 40-50 percent of battery to perform the Flashing Process.

Flash File Name: Seete_X7TS_MT6582_4.4.2-[flash-file.net].zip
Flash File Size: 444 MB

Download Flash File

How to Flash Stock Firmware ROM on Seete X7TS

To install the Stock Firmware on Seete X7TS , Please follow the guide and download the Rom . This guide is for How to Install Stock ROM on Seete X7TS .

STEP 1: Download and Install the Seete X7TS USB Driver on your computer. In case you have already installed them, you can skip this step.

STEP 2: Switch Off your Seete X7TS device .

STEP 3: After downloading Stock Firmware , extract the zip file on your system.

STEP 4: Download the SP Flash Tool on your system and extract the downloaded zip file on your system. After that you can see the following files listed. STEP 5: Form the files listed run the Flash_tool.exe file.

STEP 6: Once the SP Flash tool is started, click on the Scatter-Loading button located in the right side. STEP 7: Now locate the scatter file in your stock ROM. It is generally located in the bin/ directory. STEP 8: Now click the Download button to start the downloading process. STEP 9: After completed all the above steps, connect your Seete X7TS to your system using the USB cable and , press any button other than power button so that your system will detect your Seete X7TS Device. You can use volume buttons. Step 10: Once the flashing process is completed, a green ring will appear on your system. Now disconnect your Seete X7TS and switch it ON.Congratulations, Now you have successfully flashed the stock firmware on your Seete X7TS using SP Flash Tool.

Keep in mind:

[*] Seete X7TS Flash Tool: If you need to download the latest version of SP Flash Tool, then head over to SP Flash Tool For Windows or SP Flash Tool For linux .

[*] Backup Please: Take a backup of your important data before Flashing Seete X7TS Stock Firmware as because during the flashing process your personal data will be removed permanently.

[*] Caution]: 8888888874445566688 Preloader.bin 8888845214444558662ش.

[*] Broken link Report here.

[*] ROOT Seete X7TS:If you would like to know how to root your Seete X7TS android device, drop a comment below. We will share the tutorial for your device as quickly as possible .