How To Flash Stock Rom Firmware On Simvalley SP-142

These are the instructions to download Flash or install Stock Firmware (ROM) on Simvalley SP-142 (Original firmware) , If you searching for the Simvalley SP-142 Stock ROM then you are at the right place. Here i will guide you to install official stock Rom on Simvalley SP-142 , Here you can download the Official Simvalley SP-142 Stock Firmware ROM (flash file) on your Computer.

Download Simvalley SP-142 Stock Rom (Original firmware)

Requirements: Your Simvalley SP-142 Device should have at least 40-50 percent of battery to perform the Flashing Process.

Flash File Name: Simvalley_SP_142_20140513_4.1_QFIL-[flash-file.net].zip
Flash File Size: 316 MB

Download Flash File

How to Flash Stock Firmware ROM on Simvalley SP-142

To install the Stock Firmware on Simvalley SP-142 , Please follow the guide and download the Rom . This guide is for How to Install Stock ROM on Simvalley SP-142 .

Step 1: Donload and install Simvalley SP-142 USB Driver on your Computer (if you have already installed the Qualcomm USB Driver on your Computer then SKIP this step). Step 2: Download and extract Qualcomm Flash Image Loader (QFIL) on your computer. After extracting, you will be able to see the following files: Step 3: Now, Open QFIL.exe.   Step 4: Once QFIL is launched, you will be able to see the following screen on your computer: Step 5: Now, Switch Off your Simvalley SP-142 device. Step 6: Once your Simvalley SP-142 device is Switched Off, Press and Hold Volume UP Key and Connect the Device to the Computer using USB Cable.

Step 7: Now, In QFIL, Click on Browse Button and locate the Firmware (.mbn).   Step 8: Once, you have added the firmware file, QFIL will automatically load the rest of the firmware data.

Step 9: Now, Click on the Download button to begin the Flashing Process. Step 10: Flashing Process may take upto 10-15 minutes to complete.

Step 11: Once Flashing process is completed your Simvalley SP-142 device will be reboot automatically. Thats It, We are done!. Now disconnect your Simvalley SP-142 device from the computer and setup everything on your device to use it.

Congratulations, Now you have successfully flashed the stock firmware on your Simvalley SP-142 using Qualcomm Flash Image Loader (QFIL)

Keep in mind:

[*] Simvalley SP-142 Flash Tool: If you need to download the latest version of QFIL Flash Tool, then head over to QFIL Flash Tool for WINDOWS .

[*] Backup Please: Take a backup of your important data before Flashing Simvalley SP-142 Stock Firmware as because during the flashing process your personal data will be removed permanently.

[*] Broken link Report here.

[*] ROOT Simvalley SP-142:If you would like to know how to root your Simvalley SP-142 android device, drop a comment below. We will share the tutorial for your device as quickly as possible .