Flash Guide How to Flash a ROM to Your Android Phone
These are the instructions to download Flash or install Stock Firmware (ROM) on Siwer Telsda T6188 (Original firmware) , If you searching for the Siwer Telsda T6188 Stock ROM then you are at the right place. Here i will guide you to install official stock Rom on Siwer Telsda T6188 , Here you can download the Official Siwer Telsda T6188 Stock Firmware ROM (flash file) on your Computer
Download Siwer Telsda T6188 Stock Rom (Original firmware)
Requirements: Your Siwer Telsda T6188 Device should have at least 40-50 percent of battery to perform the Flashing Process.
Flash File Name: Siwer_Telsda_T6188_4.0-[flash-file.net].zip
Flash File Size: 202 MB
Flash Tool Link: SP Flash Tool For Windows | SP Flash Tool For linux
How to Flash Stock Firmware ROM on Siwer Telsda T6188
To install the Stock Firmware on Siwer Telsda T6188 , Please follow the guide and download the Rom . This guide is for How to Install Stock ROM on Siwer Telsda T6188 .
STEP 1: Download and Install the Siwer Telsda T6188 USB Driver on your computer. In case you have already installed them, you can skip this step.
STEP 2: Switch Off your Siwer Telsda T6188 device .
STEP 3: After downloading Stock Firmware , extract the zip file on your system.
STEP 4: Download the SP Flash Tool on your system and extract the downloaded zip file on your system. After that you can see the following files listed.
STEP 5: Form the files listed run the Flash_tool.exe file.
STEP 6: Once the SP Flash tool is started, click on the Scatter-Loading button located in the right side. 
STEP 7: Now locate the scatter file in your stock ROM. It is generally located in the bin/ directory. STEP 8: Now click the Download button to start the downloading process. 
STEP 9: After completed all the above steps, connect your Siwer Telsda T6188 to your system using the USB cable and , press any button other than power button so that your system will detect your Siwer Telsda T6188 Device. You can use volume buttons. 
Step 10: Once the flashing process is completed, a green ring will appear on your system. Now disconnect your Siwer Telsda T6188 and switch it ON.
Congratulations, Now you have successfully flashed the stock firmware on your Siwer Telsda T6188 using SP Flash Tool.
Keep in mind:
[*] Siwer Telsda T6188 Flash Tool: If you need to download the latest version of SP Flash Tool, then head over to SP Flash Tool For Windows or SP Flash Tool For linux .
[*] Backup Please: Take a backup of your important data before Flashing Siwer Telsda T6188 Stock Firmware as because during the flashing process your personal data will be removed permanently.
[*] Broken link Report here.
[*] ROOT Siwer Telsda T6188:If you would like to know how to root your Siwer Telsda T6188 android device, drop a comment below. We will share the tutorial for your device as quickly as possible .
