These are the instructions to download Flash or install Stock Firmware (ROM) on SK Phone X (Original firmware) , If you searching for the SK Phone X Stock ROM then you are at the right place. Here i will guide you to install official stock Rom on SK Phone X , Here you can download the Official SK Phone X Stock Firmware ROM (flash file) on your Computer.
Download SK Phone X Stock Rom (Original firmware)
Requirements: Your SK Phone X Device should have at least 40-50 percent of battery to perform the Flashing Process.
Flash File Name: SK_Phone_X_MT6582_4.2.2-[flash-file.net].zip
Flash File Size: 575 MB
Flash File Name: SK_Phone_X_MT6582_25062018_4.2.2-[flash-file.net].zip
Flash File Size: 583 MB
How to Flash Stock Firmware ROM on SK Phone X
To install the Stock Firmware on SK Phone X , Please follow the guide and download the Rom . This guide is for How to Install Stock ROM on SK Phone X .
STEP 1: Download and Install the SK Phone X USB Driver on your computer. In case you have already installed them, you can skip this step.
STEP 2: Switch Off your SK Phone X device .
STEP 3: After downloading Stock Firmware , extract the zip file on your system.
STEP 4: Download the SP Flash Tool on your system and extract the downloaded zip file on your system. After that you can see the following files listed. STEP 5: Form the files listed run the Flash_tool.exe file.
STEP 6: Once the SP Flash tool is started, click on the Scatter-Loading button located in the right side. STEP 7: Now locate the scatter file in your stock ROM. It is generally located in the bin/ directory. STEP 8: Now click the Download button to start the downloading process. STEP 9: After completed all the above steps, connect your SK Phone X to your system using the USB cable and , press any button other than power button so that your system will detect your SK Phone X Device. You can use volume buttons. Step 10: Once the flashing process is completed, a green ring will appear on your system. Now disconnect your SK Phone X and switch it ON.Congratulations, Now you have successfully flashed the stock firmware on your SK Phone X using SP Flash Tool.
Keep in mind:
[*] SK Phone X Flash Tool: If you need to download the latest version of SP Flash Tool, then head over to SP Flash Tool For Windows or SP Flash Tool For linux .
[*] Backup Please: Take a backup of your important data before Flashing SK Phone X Stock Firmware as because during the flashing process your personal data will be removed permanently.
[*] Caution]: 8888888874445566688 Preloader.bin 8888845214444558662ش.
[*] Broken link Report here.
[*] ROOT SK Phone X:If you would like to know how to root your SK Phone X android device, drop a comment below. We will share the tutorial for your device as quickly as possible .