How To Flash Stock Rom Firmware On SKY S408A

These are the instructions to download Flash or install Stock Firmware (ROM) on SKY S408A (Original firmware) , If you searching for the SKY S408A Stock ROM then you are at the right place. Here i will guide you to install official stock Rom on SKY S408A , Here you can download the Official SKY S408A Stock Firmware ROM (flash file) on your Computer.

DownloadSKY S408A Stock Rom (Original firmware)

Requirements: Your SKY S408A Device should have at least 40-50 percent of battery to perform the Flashing Process.

Flash File Name: SKY_S408A_SC7731_20180611_8.1.0_SPD-[flash-file.net].zip
Flash File Size: 656 MB
Flash Tool Link: SPD Flash Tool

Download Flash File

How to Flash Stock Firmware ROM on SKY S408A

To install the Stock Firmware on the SKY S408A , Please follow the guide and download the Rom . This guide is for How to Install Stock ROM on SKY S408A .

Step 1: Download and Install SKY S408A USB Driver on your Computer. If in case Spreadtrum Driver is already installed on your computer then SKIP this Step.

Step 2: After Download Stock Rom (pac) for your SKY S408A Device.

Step 3: Download and extract Spreadtrum Upgrade Tool on your computer. After extracting, you will be able to see the following files: Step 4: Now, open UpgradeDownload.exe. Step 5: Once Spreadtrum Upgrade Tool is launched, connect your SKY S408A Device to the computer (make sure your Android Device is switch off).

Step 6: Once your SKY S408A is connected successfully to the computer, click on the Load Packed Button and add the .pac file (stock rom which comes as .pac). Step 7: Once you have successfully added the Pac file in Spreadtrum Upgrade Tool, click on the Start Downloading button to begin the flashing.

Step 8: During the flashing process your SKY S408A Device will restart automatically. Once flashing is completed, you will be able to see the Green Passed Message in Spreadtrum Upgrade Tool.

Step 9: Now you have successfully flashed your SKY S408A using Spreadtrum Upgrade Tool. Once your SKY S408A Device is successfully restarted, Go to Settings About Phone Check firmware..

Congratulations, Now you have successfully flashed the stock firmware on your SKY S408A using Spreadtrum Upgrade Tool

Keep in mind:

[*] SKY S408A Flash Tool: If you need to download the latest version of SPD Flash Tool, then head over to SPD Flash Tool for WINDOWS .

[*] Backup Please: Take a backup of your important data before Flashing SKY S408A Stock Firmware as because during the flashing process your personal data will be removed permanently .

[*] Broken link Report here.

[*] ROOT SKY S408A:If you would like to know how to root your SKY S408A android device, drop a comment below. We will share the tutorial for your device as quickly as possible .