Home / Swipe / Swipe 3D
How To Flash Stock Rom Firmware On Swipe 3D

How To Flash Stock Rom Firmware On Swipe 3D

These are the instructions to download Flash or install Stock Firmware (ROM) on Swipe 3D (Original firmware) , If you searching for the Swipe 3D Stock ROM then you are at the right place. Here i will guide you to install official stock Rom on Swipe 3D , Here you can download the Official Swipe 3D Stock Firmware ROM (flash file) on your Computer

Download Swipe 3D Stock Rom (Original firmware)

Requirements: Your Swipe 3D Device should have at least 40-50 percent of battery to perform the Flashing Process.

Flash File Name: Swipe_3D_2012.09.13-[flash-file.net].zip
Flash File Size: 1 GB
Flash Tool Link: RockChip Batch Tool

Download Flash File


Flash File Name: Swipe_3D_Silver-Black_Mat_Finish_2012.08.29-[flash-file.net].zip
Flash File Size: 841 MB
Flash Tool Link: RockChip Batch Tool

Download Flash File

How to Flash Stock Firmware ROM on Swipe 3D

To install the Stock Firmware on Swipe 3D , Please follow the guide and download the Rom . This guide is for How to Install Stock ROM on Swipe 3D .

Step 1: Download and install Rockchip Driver Assistant on your computer. How To Flash Stock Rom Firmware On Swipe 3D Step 2: Download and extract RockChip Batch Tool on your computer. After Extracting you will be able to see the following files: How To Flash Stock Rom Firmware On Swipe 3D Step 3: Now open RKBatchTool.exe from the extracted files. How To Flash Stock Rom Firmware On Swipe 3D Step 4: Once RKBatchTool.exe is launched, Click on the Box right to the FW Path. How To Flash Stock Rom Firmware On Swipe 3D How To Flash Stock Rom Firmware On Swipe 3D   Step 5: Once you have succesfully added the firmware, RockChip Tool will load it. How To Flash Stock Rom Firmware On Swipe 3D Step 6: Now, Turn Off your Swipe 3D Device and tablets. How To Flash Stock Rom Firmware On Swipe 3D Step 7: Now, Press and Hold Volume UP Key on your Swipe 3D Device and connect it to the computer using the USB cable.

Step 8: Do not release the Volume UP Key on your Swipe 3D Device until Icon 1 turns Green in Color. How To Flash Stock Rom Firmware On Swipe 3D Step 9: Once your Swipe 3D Device is successfully added to the computer, Click on the Restore Button to begin the Flashing process. How To Flash Stock Rom Firmware On Swipe 3D Step 10: Now, RockChip Batch Tool will Flash the Firmware on your Swipe 3D Device (flashing usually takes 4-6 minutes to complete).

Step 13: Once Flashing is completed successfully then you will be able to see Restore Done Success Message. How To Flash Stock Rom Firmware On Swipe 3D Step 14: Now, close RockChip Batch Tool by clicking on the Exit Button.

  Step 15: Disconnect your Swipe 3D Device from the Computer and Restart it.

Congratulations, Now you have successfully flashed the stock firmware on your Swipe 3D using RockChip Batch Tool.

Keep in mind:

[*] Swipe 3D Flash Tool: If you need to download the latest version of RockChip Batch Tool, then head over to RockChip Batch Tool .

[*] Backup Please: Take a backup of your important data before Flashing Swipe 3D Stock Firmware as because during the flashing process your personal data will be removed permanently.

[*] Broken link Report here.

[*] ROOT Swipe 3D:If you would like to know how to root your Swipe 3D android device, drop a comment below. We will share the tutorial for your device as quickly as possible .

Check Also

How To Flash Stock Rom Firmware On Swipe Fablet F2

Swipe Fablet F2

These are the instructions to download Flash or install Stock Firmware (ROM) on Swipe Fablet …

Leave a Reply

%d bloggers like this: