Home / Tanix / Tanix TX7

How To Flash Stock Rom Firmware On Tanix TX7

These are the instructions to download Flash or install Stock Firmware (ROM) on Tanix TX7 (Original firmware) , If you searching for the Tanix TX7 Stock ROM then you are at the right place. Here i will guide you to install official stock Rom on Tanix TX7 , Here you can download the Official Tanix TX7 Stock Firmware ROM (flash file) on your Computer.

Download Tanix TX7 Stock Rom (Original firmware)

Requirements: Your Tanix TX7 Device should have at least 40-50 percent of battery to perform the Flashing Process.

Flash File Name: Tanix_TX7_S912_05092017_OTA-[flash-file.net].zip
Flash File Size: 717 MB

Download Flash File

How to Flash Stock Firmware ROM on Tanix TX7

To install the Stock Firmware on Tanix TX7 , Please follow the guide and download the Rom . This guide is for How to Install Stock ROM on Tanix TX7 .

STEP 1: Download and Install the Tanix TX7 USB Driver on your computer. In case you have already installed them, you can skip this step.

STEP 2: Switch Off your Tanix TX7 device .

STEP 3: After downloading Stock Firmware , extract the zip file on your system.

STEP 4: Download the SP Flash Tool on your system and extract the downloaded zip file on your system. After that you can see the following files listed.Guide To flash Official Stock ROM On Android Device STEP 5: Form the files listed run the Flash_tool.exe file.

Guide To flash Official Stock ROM On Android DeviceGuide To flash Official Stock ROM On Android Device

STEP 6: Once the SP Flash tool is started, click on the Scatter-Loading button located in the right side. Guide To flash Official Stock ROM On Android Device STEP 7: Now locate the scatter file in your stock ROM. It is generally located in the bin/ directory. STEP 8: Now click the Download button to start the downloading process. STEP 9: After completed all the above steps, connect your Tanix TX7 to your system using the USB cable and , press any button other than power button so that your system will detect your Tanix TX7 Device. You can use volume buttons. Guide To flash Official Stock ROM On Android Device Guide To flash Official Stock ROM On Android Device Step 10: Once the flashing process is completed, a green ring will appear on your system. Now disconnect your Tanix TX7 and switch it ON.Congratulations, Now you have successfully flashed the stock firmware on your Tanix TX7 using SP Flash Tool.

Keep in mind:

[*] Backup Please: Take a backup of your important data before Flashing Tanix TX7 Stock Firmware as because during the flashing process your personal data will be removed permanently.

[*] Broken link Report here.

[*] ROOT Tanix TX7:If you would like to know how to root your Tanix TX7 android device, drop a comment below. We will share the tutorial for your device as quickly as possible .

Check Also

Tanix TX9 Pro

These are the instructions to download Flash or install Stock Firmware (ROM) on Tanix TX9 …

Leave a Reply

Your email address will not be published. Required fields are marked *