Flash Guide How to Flash a ROM to Your Android Phone
These are the instructions to download Flash or install Stock Firmware (ROM) on Teclast A10H (Original firmware) , If you searching for the Teclast A10H Stock ROM then you are at the right place. Here i will guide you to install official stock Rom on Teclast A10H , Here you can download the Official Teclast A10H Stock Firmware ROM (flash file) on your Computer.
DownloadTeclast A10H Stock Rom (Original firmware)
Requirements: Your Teclast A10H Device should have at least 40-50 percent of battery to perform the Flashing Process.
Flash File Name: Teclast_A10H_MT8163_20180517_7.0-[flash-file.net].zip
Flash File Size: 668 MB
Flash Tool Link: SP Flash Tool For Windows | SP Flash Tool For linux
How to Flash Stock Firmware ROM on Teclast A10H
To install the Stock Firmware on Teclast A10H , Please follow the guide and download the Rom . This guide is for How to Install Stock ROM on Teclast A10H .
STEP 1: Download and Install the Teclast A10H USB Driver on your computer. In case you have already installed them, you can skip this step.
STEP 2: Switch Off your Teclast A10H device .
STEP 3: After downloading Stock Firmware , extract the zip file on your system.
STEP 4: Download the SP Flash Tool on your system and extract the downloaded zip file on your system. After that you can see the following files listed.
STEP 5: Form the files listed run the Flash_tool.exe file.
STEP 6: Once the SP Flash tool is started, click on the Scatter-Loading button located in the right side. 
STEP 7: Now locate the scatter file in your stock ROM. It is generally located in the bin/ directory. STEP 8: Now click the Download button to start the downloading process. 
STEP 9: After completed all the above steps, connect your Teclast A10H to your system using the USB cable and , press any button other than power button so that your system will detect your Teclast A10H Device. You can use volume buttons. 
Step 10: Once the flashing process is completed, a green ring will appear on your system. Now disconnect your Teclast A10H and switch it ON.
Congratulations, Now you have successfully flashed the stock firmware on your Teclast A10H using SP Flash Tool.
Keep in mind:
[*] Teclast A10H Flash Tool: If you need to download the latest version of SP Flash Tool, then head over to SP Flash Tool For Windows or SP Flash Tool For linux .
[*] Backup Please: Take a backup of your important data before Flashing Teclast A10H Stock Firmware as because during the flashing process your personal data will be removed permanently .
[*] Broken link Report here.
[*] ROOT Teclast A10H:If you would like to know how to root your Teclast A10H android device, drop a comment below. We will share the tutorial for your device as quickly as possible .
