Flash Guide How to Flash a ROM to Your Android Phone
These are the instructions to download Flash or install Stock Firmware (ROM) on Tecno 7C Pro (Original firmware) , If you searching for the Tecno 7C Pro Stock ROM then you are at the right place. Here i will guide you to install official stock Rom on Tecno 7C Pro , Here you can download the Official Tecno 7C Pro Stock Firmware ROM (flash file) on your Computer.
DownloadTecno 7C Pro Stock Rom (Original firmware)
Requirements: Your Tecno 7C Pro Device should have at least 40-50 percent of battery to perform the Flashing Process.
Flash File Name: Tecno_7C_Pro_MT6582_5.1-[flash-file.net].zip
Flash File Size: 1 GB
ROM Android Version: 5.1
Flash Tool Link: SP Flash Tool For Windows | SP Flash Tool For linux
How to Flash Stock Firmware ROM on Tecno 7C Pro
To install the Stock Firmware on the Tecno 7C Pro , Please follow the guide and download the Rom . This guide is for How to Install Stock ROM on Tecno 7C Pro .
STEP 1: Download and Install the Tecno 7C Pro USB Driver on your computer. In case you have already installed them, you can skip this step.
STEP 2: Switch Off your Tecno 7C Pro device .
STEP 3: After downloading Stock Firmware , extract the zip file on your system.
STEP 4: Download the SP Flash Tool on your system and extract the downloaded zip file on your system. After that you can see the following files listed.
STEP 5: Form the files listed run the Flash_tool.exe file.
STEP 6: Once the SP Flash tool is started, click on the Scatter-Loading button located in the right side. 
STEP 7: Now locate the scatter file in your stock ROM. It is generally located in the bin/ directory. STEP 8: Now click the Download button to start the downloading process. 
STEP 9: After completed all the above steps, connect your Tecno 7C Pro to your system using the USB cable and , press any button other than power button so that your system will detect your Tecno 7C Pro Device. You can use volume buttons. 
Step 10: Once the flashing process is completed, a green ring will appear on your system. Now disconnect your Tecno 7C Pro and switch it ON.
Congratulations, Now you have successfully flashed the stock firmware on your Tecno 7C Pro using SP Flash Tool.
Keep in mind:
[*] Tecno 7C Pro Flash Tool: If you need to download the latest version of SP Flash Tool, then head over to SP Flash Tool For Windows or SP Flash Tool For linux .
[*] Backup Please: Take a backup of your important data before Flashing Tecno 7C Pro Stock Firmware as because during the flashing process your personal data will be removed permanently .
[*] Broken link Report here.
[*] ROOT Tecno 7C Pro:If you would like to know how to root your Tecno 7C Pro android device, drop a comment below. We will share the tutorial for your device as quickly as possible .
