How To Flash Stock Rom Firmware On Tecno Camon X688 Clone

These are the instructions to download Flash or install Stock Firmware (ROM) on Tecno Camon X688 Clone (Original firmware) , If you searching for the Tecno Camon X688 Clone Stock ROM then you are at the right place. Here i will guide you to install official stock Rom on Tecno Camon X688 Clone , Here you can download the Official Tecno Camon X688 Clone Stock Firmware ROM (flash file) on your Computer.

DownloadTecno Camon X688 Clone Stock Rom (Original firmware)

Requirements: Your Tecno Camon X688 Clone Device should have at least 40-50 percent of battery to perform the Flashing Process.

Flash File Name: Tecno_Camon_X688_Clone_V01_20170119_SPD-[flash-file.net].zip
Flash File Size: 670 MB
Flash Tool Link: SPD Flash Tool

Download Flash File

How to Flash Stock Firmware ROM on Tecno Camon X688 Clone

To install the Stock Firmware on the Tecno Camon X688 Clone , Please follow the guide and download the Rom . This guide is for How to Install Stock ROM on Tecno Camon X688 Clone .

Step 1: Download and Install Tecno Camon X688 Clone USB Driver on your Computer. If in case Spreadtrum Driver is already installed on your computer then SKIP this Step.

Step 2: After Download Stock Rom (pac) for your Tecno Camon X688 Clone Device.

Step 3: Download and extract Spreadtrum Upgrade Tool on your computer. After extracting, you will be able to see the following files: Step 4: Now, open UpgradeDownload.exe. Step 5: Once Spreadtrum Upgrade Tool is launched, connect your Tecno Camon X688 Clone Device to the computer (make sure your Android Device is switch off).

Step 6: Once your Tecno Camon X688 Clone is connected successfully to the computer, click on the Load Packed Button and add the .pac file (stock rom which comes as .pac). Step 7: Once you have successfully added the Pac file in Spreadtrum Upgrade Tool, click on the Start Downloading button to begin the flashing.

Step 8: During the flashing process your Tecno Camon X688 Clone Device will restart automatically. Once flashing is completed, you will be able to see the Green Passed Message in Spreadtrum Upgrade Tool.

Step 9: Now you have successfully flashed your Tecno Camon X688 Clone using Spreadtrum Upgrade Tool. Once your Tecno Camon X688 Clone Device is successfully restarted, Go to Settings About Phone Check firmware..

Congratulations, Now you have successfully flashed the stock firmware on your Tecno Camon X688 Clone using Spreadtrum Upgrade Tool

Keep in mind:

[*] Tecno Camon X688 Clone Flash Tool: If you need to download the latest version of SPD Flash Tool, then head over to SPD Flash Tool for WINDOWS .

[*] Backup Please: Take a backup of your important data before Flashing Tecno Camon X688 Clone Stock Firmware as because during the flashing process your personal data will be removed permanently .

[*] Broken link Report here.

[*] ROOT Tecno Camon X688 Clone:If you would like to know how to root your Tecno Camon X688 Clone android device, drop a comment below. We will share the tutorial for your device as quickly as possible .