Home / Tecno / Tecno PhonePad 7E

How To Flash Stock Rom Firmware On Tecno PhonePad 7E

These are the instructions to download Flash or install Stock Firmware (ROM) on Tecno PhonePad 7E (Original firmware) , If you searching for the Tecno PhonePad 7E Stock ROM then you are at the right place. Here i will guide you to install official stock Rom on Tecno PhonePad 7E , Here you can download the Official Tecno PhonePad 7E Stock Firmware ROM (flash file) on your Computer.

DownloadTecno PhonePad 7E Stock Rom (Original firmware)

Requirements: Your Tecno PhonePad 7E Device should have at least 40-50 percent of battery to perform the Flashing Process.

Flash File Name: Tecno_Phonepad_7E_DLA1_9223C_A1_L_MT6735M_20151113-[flash-file.net].zip
Flash File Size: 1 GB
ROM Android Version: 5.1
Flash Tool Link: SP Flash Tool For Windows | SP Flash Tool For linux

Download Flash File

How to Flash Stock Firmware ROM on Tecno PhonePad 7E

To install the Stock Firmware on the Tecno PhonePad 7E , Please follow the guide and download the Rom . This guide is for How to Install Stock ROM on Tecno PhonePad 7E .

STEP 1: Download and Install the Tecno PhonePad 7E USB Driver on your computer. In case you have already installed them, you can skip this step.

STEP 2: Switch Off your Tecno PhonePad 7E device .

STEP 3: After downloading Stock Firmware , extract the zip file on your system.

STEP 4: Download the SP Flash Tool on your system and extract the downloaded zip file on your system. After that you can see the following files listed.Guide To flash Official Stock ROM On Android Device STEP 5: Form the files listed run the Flash_tool.exe file.

Guide To flash Official Stock ROM On Android DeviceGuide To flash Official Stock ROM On Android Device

STEP 6: Once the SP Flash tool is started, click on the Scatter-Loading button located in the right side. Guide To flash Official Stock ROM On Android Device STEP 7: Now locate the scatter file in your stock ROM. It is generally located in the bin/ directory. STEP 8: Now click the Download button to start the downloading process. STEP 9: After completed all the above steps, connect your Tecno PhonePad 7E to your system using the USB cable and , press any button other than power button so that your system will detect your Tecno PhonePad 7E Device. You can use volume buttons. Guide To flash Official Stock ROM On Android Device Guide To flash Official Stock ROM On Android Device Step 10: Once the flashing process is completed, a green ring will appear on your system. Now disconnect your Tecno PhonePad 7E and switch it ON.Congratulations, Now you have successfully flashed the stock firmware on your Tecno PhonePad 7E using SP Flash Tool.

Keep in mind:

[*] Tecno PhonePad 7E Flash Tool: If you need to download the latest version of SP Flash Tool, then head over to SP Flash Tool For Windows or SP Flash Tool For linux .

[*] Backup Please: Take a backup of your important data before Flashing Tecno PhonePad 7E Stock Firmware as because during the flashing process your personal data will be removed permanently .

[*] Broken link Report here.

[*] ROOT Tecno PhonePad 7E:If you would like to know how to root your Tecno PhonePad 7E android device, drop a comment below. We will share the tutorial for your device as quickly as possible .

Check Also

Tecno G9

These are the instructions to download Flash or install Stock Firmware (ROM) on Tecno G9 …

Leave a Reply

Your email address will not be published. Required fields are marked *