Home / Telefunken / Telefunken TEL1013GIQ

How To Flash Stock Rom Firmware On Telefunken TEL1013GIQ

These are the instructions to download Flash or install Stock Firmware (ROM) on Telefunken TEL1013GIQ (Original firmware) , If you searching for the Telefunken TEL1013GIQ Stock ROM then you are at the right place. Here i will guide you to install official stock Rom on Telefunken TEL1013GIQ , Here you can download the Official Telefunken TEL1013GIQ Stock Firmware ROM (flash file) on your Computer

Download Telefunken TEL1013GIQ Stock Rom (Original firmware)

Requirements: Your Telefunken TEL1013GIQ Device should have at least 40-50 percent of battery to perform the Flashing Process.

Flash File Name: Telefunken_TEL1013GIQ_MR100ZQ_MT6582_V8_8GB_1G_4.4W18-[flash-file.net].zip
Flash File Size: 692 MB
Flash Tool Link: SP Flash Tool For Windows | SP Flash Tool For linux

Download Flash File

How to Flash Stock Firmware ROM on Telefunken TEL1013GIQ

To install the Stock Firmware on Telefunken TEL1013GIQ , Please follow the guide and download the Rom . This guide is for How to Install Stock ROM on Telefunken TEL1013GIQ .

STEP 1: Download and Install the Telefunken TEL1013GIQ USB Driver on your computer. In case you have already installed them, you can skip this step.

STEP 2: Switch Off your Telefunken TEL1013GIQ device .

STEP 3: After downloading Stock Firmware , extract the zip file on your system.

STEP 4: Download the SP Flash Tool on your system and extract the downloaded zip file on your system. After that you can see the following files listed.Guide To flash Official Stock ROM On Android Device STEP 5: Form the files listed run the Flash_tool.exe file.

Guide To flash Official Stock ROM On Android DeviceGuide To flash Official Stock ROM On Android Device

STEP 6: Once the SP Flash tool is started, click on the Scatter-Loading button located in the right side. Guide To flash Official Stock ROM On Android Device STEP 7: Now locate the scatter file in your stock ROM. It is generally located in the bin/ directory. STEP 8: Now click the Download button to start the downloading process. STEP 9: After completed all the above steps, connect your Telefunken TEL1013GIQ to your system using the USB cable and , press any button other than power button so that your system will detect your Telefunken TEL1013GIQ Device. You can use volume buttons. Guide To flash Official Stock ROM On Android Device Guide To flash Official Stock ROM On Android Device Step 10: Once the flashing process is completed, a green ring will appear on your system. Now disconnect your Telefunken TEL1013GIQ and switch it ON.Congratulations, Now you have successfully flashed the stock firmware on your Telefunken TEL1013GIQ using SP Flash Tool.

Keep in mind:

[*] Telefunken TEL1013GIQ Flash Tool: If you need to download the latest version of SP Flash Tool, then head over to SP Flash Tool For Windows or SP Flash Tool For linux .

[*] Backup Please: Take a backup of your important data before Flashing Telefunken TEL1013GIQ Stock Firmware as because during the flashing process your personal data will be removed permanently.

[*] Broken link Report here.

[*] ROOT Telefunken TEL1013GIQ:If you would like to know how to root your Telefunken TEL1013GIQ android device, drop a comment below. We will share the tutorial for your device as quickly as possible .

Check Also

Telefunken TelC-1013GIQP

These are the instructions to download Flash or install Stock Firmware (ROM) on Telefunken TelC-1013GIQP …

Leave a Reply

Your email address will not be published. Required fields are marked *