These are the instructions to download Flash or install Stock Firmware (ROM) on Tinmo F300 (Original firmware) , If you searching for the Tinmo F300 Stock ROM then you are at the right place. Here i will guide you to install official stock Rom on Tinmo F300 , Here you can download the Official Tinmo F300 Stock Firmware ROM (flash file) on your Computer
Download Tinmo F300 Stock Rom (Original firmware)
Requirements: Your Tinmo F300 Device should have at least 40-50 percent of battery to perform the Flashing Process.
Flash File Name: Tinmo_F300_MT6572_Bird72_4.4.2-[flash-file.net].zip
Flash File Size: 442 MB
Flash Tool Link: SP Flash Tool For Windows | SP Flash Tool For linux
Flash File Name: Tinmo_F300_21042017_MIRA-[flash-file.net].zip
Flash File Size: 4 MB
Flash Tool Link: Miracle Flash Tool
Flash-Guide: Use Miracle Box Software to Flash the firmware.
How to Flash Stock Firmware ROM on Tinmo F300
To install the Stock Firmware on Tinmo F300 , Please follow the guide and download the Rom . This guide is for How to Install Stock ROM on Tinmo F300 .
STEP 1: Download and Install the Tinmo F300 USB Driver on your computer. In case you have already installed them, you can skip this step.
STEP 2: Switch Off your Tinmo F300 device .
STEP 3: After downloading Stock Firmware , extract the zip file on your system.
STEP 4: Download the SP Flash Tool on your system and extract the downloaded zip file on your system. After that you can see the following files listed. STEP 5: Form the files listed run the Flash_tool.exe file.
STEP 6: Once the SP Flash tool is started, click on the Scatter-Loading button located in the right side. STEP 7: Now locate the scatter file in your stock ROM. It is generally located in the bin/ directory. STEP 8: Now click the Download button to start the downloading process. STEP 9: After completed all the above steps, connect your Tinmo F300 to your system using the USB cable and , press any button other than power button so that your system will detect your Tinmo F300 Device. You can use volume buttons. Step 10: Once the flashing process is completed, a green ring will appear on your system. Now disconnect your Tinmo F300 and switch it ON.Congratulations, Now you have successfully flashed the stock firmware on your Tinmo F300 using SP Flash Tool.
Keep in mind:
[*] Tinmo F300 Flash Tool: If you need to download the latest version of SP Flash Tool, then head over to SP Flash Tool For Windows or SP Flash Tool For linux .
[*] Backup Please: Take a backup of your important data before Flashing Tinmo F300 Stock Firmware as because during the flashing process your personal data will be removed permanently.
[*] Broken link Report here.
[*] ROOT Tinmo F300:If you would like to know how to root your Tinmo F300 android device, drop a comment below. We will share the tutorial for your device as quickly as possible .