Flash Guide How to Flash a ROM to Your Android Phone
These are the instructions to download Flash or install Stock Firmware (ROM) on Tinno K200AG (Original firmware) , If you searching for the Tinno K200AG Stock ROM then you are at the right place. Here i will guide you to install official stock Rom on Tinno K200AG , Here you can download the Official Tinno K200AGStock Firmware ROM (flash file) on your Computer .
DownloadTinno K200AG Stock Rom (Original firmware)
Requirements: Your Tinno K200AG Device should have at least 40-50 percent of battery to perform the Flashing Process.
Flash File Name: Tinno_K200AG_MT6580_1G_V1.14_09012019-[flash-file.net].zip
Flash File Size: 759 MB
How to Flash Stock Firmware ROM on Tinno K200AG
To install the Stock Firmware on Tinno K200AG Stock , Please follow the guide and download the Rom . This guide is for How to Install Stock ROM on Tinno K200AG .
STEP 1: Download and Install the Tinno K200AG USB Driver on your computer. In case you have already installed them, you can skip this step.
STEP 2: Switch Off your Tinno K200AG device .
STEP 3: After downloading Stock Firmware , extract the zip file on your system.
STEP 4: Download the SP Flash Tool on your system and extract the downloaded zip file on your system. After that you can see the following files listed.
STEP 5: Form the files listed run the Flash_tool.exe file.
STEP 6: Once the SP Flash tool is started, click on the Scatter-Loading button located in the right side. 
STEP 7: Now locate the scatter file in your stock ROM. It is generally located in the bin/ directory. STEP 8: Now click the Download button to start the downloading process. 
STEP 9: After completed all the above steps, connect your Tinno K200AG to your system using the USB cable and , press any button other than power button so that your system will detect your Tinno K200AG Device. You can use volume buttons. 
Step 10: Once the flashing process is completed, a green ring will appear on your system. Now disconnect your Tinno K200AG and switch it ON.
Congratulations, Now you have successfully flashed the stock firmware on your Tinno K200AG using SP Flash Tool.
Keep in mind:
[*] Tinno K200AG Flash Tool: If you need to download the latest version of SP Flash Tool, then head over to SP Flash Tool For Windows or SP Flash Tool For linux .
[*] Backup Please: Take a backup of your important data before Flashing Tinno K200AG Stock Firmware as because during the flashing process your personal data will be removed permanently.
[*] Caution]: On Mediatek powered devices, We do NOT recommend to Flash the Preloader.bin. As it may brick the device, therefore we recommend you to Untick the Preloader while Flashing the firmware.
[*] Broken link Report here.
[*] ROOT Tinno K200AG:If you would like to know how to root your Tinno K200AG android device, drop a comment below. We will share the tutorial for your device as quickly as possible .