How To Flash Stock Rom Firmware On Tork T3 Super

These are the instructions to download Flash or install Stock Firmware (ROM) on Tork T3 Super (Original firmware) , If you searching for the Tork T3 Super Stock ROM then you are at the right place. Here i will guide you to install official stock Rom on Tork T3 Super , Here you can download the Official Tork T3 Super Stock Firmware ROM (flash file) on your Computer

Download Tork T3 Super Stock Rom (Original firmware)

Requirements: Your Tork T3 Super Device should have at least 40-50 percent of battery to perform the Flashing Process.

Flash File Name: Tork_T3_Super_V05_18122018_FSPD-[flash-file.net].zip
Flash File Size: 4 MB
Flash Tool Link: SPD Flash Tool

Download Flash File

How to Flash Stock Firmware ROM on Tork T3 Super

To install the Stock Firmware on Tork T3 Super , Please follow the guide and download the Rom . This guide is for How to Install Stock ROM on Tork T3 Super .

Step 1: Download and Install Tork T3 Super USB Driver on your Computer. If in case Spreadtrum Driver is already installed on your computer then SKIP this Step.

Step 2: After Download Stock Rom (pac) for your Tork T3 Super Device.

Step 3: Download and extract Spreadtrum Upgrade Tool on your computer. After extracting, you will be able to see the following files: Step 4: Now, open UpgradeDownload.exe. Step 5: Once Spreadtrum Upgrade Tool is launched, connect your Tork T3 Super Device to the computer (make sure your Android Device is switch off).

Step 6: Once your Tork T3 Super is connected successfully to the computer, click on the Load Packed Button and add the .pac file (stock rom which comes as .pac). Step 7: Once you have successfully added the Pac file in Spreadtrum Upgrade Tool, click on the Start Downloading button to begin the flashing.

Step 8: During the flashing process your Tork T3 Super Device will restart automatically. Once flashing is completed, you will be able to see the Green Passed Message in Spreadtrum Upgrade Tool.

Step 9: Now you have successfully flashed your Tork T3 Super using Spreadtrum Upgrade Tool. Once your Tork T3 Super Device is successfully restarted, Go to Settings About Phone Check firmware..

Congratulations, Now you have successfully flashed the stock firmware on your Tork T3 Super using Spreadtrum Upgrade Tool

Keep in mind:

[*] Tork T3 Super Flash Tool: If you need to download the latest version of SPD Flash Tool, then head over to SPD Flash Tool .

[*] Backup Please: Take a backup of your important data before Flashing Tork T3 Super Stock Firmware as because during the flashing process your personal data will be removed permanently.

[*] Broken link Report here.

[*] ROOT Tork T3 Super:If you would like to know how to root your Tork T3 Super android device, drop a comment below. We will share the tutorial for your device as quickly as possible .