How To Flash Stock Rom Firmware On Treq Basic 2K 4GB

These are the instructions to download Flash or install Stock Firmware (ROM) on Treq Basic 2K 4GB (Original firmware) , If you searching for the Treq Basic 2K 4GB Stock ROM then you are at the right place. Here i will guide you to install official stock Rom on Treq Basic 2K 4GB , Here you can download the Official Treq Basic 2K 4GB Stock Firmware ROM (flash file) on your Computer.

Download Treq Basic 2K 4GB Stock Rom (Original firmware)

Requirements: Your Treq Basic 2K 4GB Device should have at least 40-50 percent of battery to perform the Flashing Process.

Flash File Name: Treq_Basic_2K-4GB_4.4.2_LS-[flash-file.net].zip
Flash File Size: 370 MB

Download Flash File

How to Flash Stock Firmware ROM on Treq Basic 2K 4GB

To install the Stock Firmware on Treq Basic 2K 4GB , Please follow the guide and download the Rom . This guide is for How to Install Stock ROM on Treq Basic 2K 4GB .

Step 1: Download and install Treq Basic 2K 4GB ADB Drivers on your computer. Step 2: Download and extract LiveSuit Application on your computer. After Extracting you will be able to see the following files: Step 3: Now LiveSuit.exe from the extracted files. Step 4: Once LiveSuit.exe is launched, Select Yes to follow the Upgrade Wizard.   Step 5: Now, You have to select the Upgrade Mode which is General and Mandatory. Click on Mandatory to continue.   Step 6: Now, Unplug all the connected Treq Basic 2K 4GB device from the computer (if you have already connected), then Click on Yes button to Continue.   Step 7: Next, You have to select the .img firmware. If you are ready Click on Yes Button and select the firmware. Step 8: Now, Dont Click on Finish Button.

Step 9: Now, It is the right time to connect your Treq Basic 2K 4GB device to the Computer using USB Cable. Before Connecting the Treq Basic 2K 4GB device, make sure its Power Off. Firstly Connect the USB Cable to the Computer then on your Treq Basic 2K 4GB device Press Volume Down Key and Connect the USB Cable to it. While holding the Volume Down Key immediately Press Power Key for 10 times, so that the computer can recognize your Android device.

Step 10: Once your Treq Basic 2K 4GB device is successfully recognized by your computer, you will be able to see the following Window saying to Mandatory Format the Device. Click on Yes to Continue. Step 11: On the next Windows, again click on Yes Button to continue.

Step 12: Now LiveSuite will start the flashing process (flashing usually takes 4-6 minutes to complete). Step 13: Once Flashing is completed successfully then you will be able to see Upgrade Succeeds Window. Click on OK to Close it. Step 14: Now, close LiveSuit Application by clicking on the Exit Button. Step 15: Disconnect your Android device from the Computer and Restart it.

Congratulations, Now you have successfully flashed the stock firmware on your Treq Basic 2K 4GB using LiveSuit Application.

Keep in mind:

[*] Treq Basic 2K 4GB Flash Tool: If you need to download the latest version of Livesuit Flash Tool, then head over to Livesuit Flash Tool for Windows .

[*] Backup Please: Take a backup of your important data before Flashing Treq Basic 2K 4GB Stock Firmware as because during the flashing process your personal data will be removed permanently.

[*] Broken link Report here.

[*] ROOT Treq Basic 2K 4GB:If you would like to know how to root your Treq Basic 2K 4GB android device, drop a comment below. We will share the tutorial for your device as quickly as possible .