These are the instructions to download Flash or install Stock Firmware (ROM) on Truconnect X455 (Original firmware) , If you searching for the Truconnect X455 Stock ROM then you are at the right place. Here i will guide you to install official stock Rom on Truconnect X455 , Here you can download the Official Truconnect X455 Stock Firmware ROM (flash file) on your Computer.
DownloadTruconnect X455 Stock Rom (Original firmware)
Requirements: Your Truconnect X455 Device should have at least 40-50 percent of battery to perform the Flashing Process.
Flash File Name: Truconnect_X455_MT6580_20171219_6.0-[flash-file.net].zip
Flash File Size: 793 MB
Flash Tool Link: SP Flash Tool For Windows | SP Flash Tool For linux
How to Flash Stock Firmware ROM on Truconnect X455
To install the Stock Firmware on Truconnect X455 , Please follow the guide and download the Rom . This guide is for How to Install Stock ROM on Truconnect X455 .
STEP 1: Download and Install the Truconnect X455 USB Driver on your computer. In case you have already installed them, you can skip this step.
STEP 2: Switch Off your Truconnect X455 device .
STEP 3: After downloading Stock Firmware , extract the zip file on your system.
STEP 4: Download the SP Flash Tool on your system and extract the downloaded zip file on your system. After that you can see the following files listed. STEP 5: Form the files listed run the Flash_tool.exe file.
STEP 6: Once the SP Flash tool is started, click on the Scatter-Loading button located in the right side. STEP 7: Now locate the scatter file in your stock ROM. It is generally located in the bin/ directory. STEP 8: Now click the Download button to start the downloading process. STEP 9: After completed all the above steps, connect your Truconnect X455 to your system using the USB cable and , press any button other than power button so that your system will detect your Truconnect X455 Device. You can use volume buttons. Step 10: Once the flashing process is completed, a green ring will appear on your system. Now disconnect your Truconnect X455 and switch it ON.Congratulations, Now you have successfully flashed the stock firmware on your Truconnect X455 using SP Flash Tool.
Keep in mind:
[*] Truconnect X455 Flash Tool: If you need to download the latest version of SP Flash Tool, then head over to SP Flash Tool For Windows or SP Flash Tool For linux .
[*] Backup Please: Take a backup of your important data before Flashing Truconnect X455 Stock Firmware as because during the flashing process your personal data will be removed permanently .
[*] Broken link Report here.
[*] ROOT Truconnect X455:If you would like to know how to root your Truconnect X455 android device, drop a comment below. We will share the tutorial for your device as quickly as possible .