How To Flash Stock Rom Firmware On True Smart Tab Gen Me

These are the instructions to download Flash or install Stock Firmware (ROM) on True Smart Tab Gen Me (Original firmware) , If you searching for the True Smart Tab Gen Me Stock ROM then you are at the right place. Here i will guide you to install official stock Rom on True Smart Tab Gen Me , Here you can download the Official True Smart Tab Gen Me Stock Firmware ROM (flash file) on your Computer.

DownloadTrue Smart Tab Gen Me Stock Rom (Original firmware)

Requirements: Your True Smart Tab Gen Me Device should have at least 40-50 percent of battery to perform the Flashing Process.

Flash File Name: True_Smart_Tab_Gen_Me_MT6572_V20-[flash-file.net].zip
Flash File Size: 655 MB
Flash Tool Link: SP Flash Tool For Windows | SP Flash Tool For linux

Download Flash File

How to Flash Stock Firmware ROM on True Smart Tab Gen Me

To install the Stock Firmware on True Smart Tab Gen Me , Please follow the guide and download the Rom . This guide is for How to Install Stock ROM on True Smart Tab Gen Me .

STEP 1: Download and Install the True Smart Tab Gen Me USB Driver on your computer. In case you have already installed them, you can skip this step.

STEP 2: Switch Off your True Smart Tab Gen Me device .

STEP 3: After downloading Stock Firmware , extract the zip file on your system.

STEP 4: Download the SP Flash Tool on your system and extract the downloaded zip file on your system. After that you can see the following files listed. STEP 5: Form the files listed run the Flash_tool.exe file.

STEP 6: Once the SP Flash tool is started, click on the Scatter-Loading button located in the right side. STEP 7: Now locate the scatter file in your stock ROM. It is generally located in the bin/ directory. STEP 8: Now click the Download button to start the downloading process. STEP 9: After completed all the above steps, connect your True Smart Tab Gen Me to your system using the USB cable and , press any button other than power button so that your system will detect your True Smart Tab Gen Me Device. You can use volume buttons. Step 10: Once the flashing process is completed, a green ring will appear on your system. Now disconnect your True Smart Tab Gen Me and switch it ON.Congratulations, Now you have successfully flashed the stock firmware on your True Smart Tab Gen Me using SP Flash Tool.

Keep in mind:

[*] True Smart Tab Gen Me Flash Tool: If you need to download the latest version of SP Flash Tool, then head over to SP Flash Tool For Windows or SP Flash Tool For linux .

[*] Backup Please: Take a backup of your important data before Flashing True Smart Tab Gen Me Stock Firmware as because during the flashing process your personal data will be removed permanently .

[*] Broken link Report here.

[*] ROOT True Smart Tab Gen Me:If you would like to know how to root your True Smart Tab Gen Me android device, drop a comment below. We will share the tutorial for your device as quickly as possible .