These are the instructions to download Flash or install Stock Firmware (ROM) on Twinovo T308 (Original firmware) , If you searching for the Twinovo T308 Stock ROM then you are at the right place. Here i will guide you to install official stock Rom on Twinovo T308 , Here you can download the Official Twinovo T308Stock Firmware ROM (flash file) on your Computer .
DownloadTwinovo T308 Stock Rom (Original firmware)
Requirements: Your Twinovo T308 Device should have at least 40-50 percent of battery to perform the Flashing Process.
Flash File Name: Twinovo_T308_MT6582_141029_4.4.2-[flash-file.net].zip
Flash File Size: 513 MB
How to Flash Stock Firmware ROM on Twinovo T308
To install the Stock Firmware on Twinovo T308 Stock , Please follow the guide and download the Rom . This guide is for How to Install Stock ROM on Twinovo T308 .
STEP 1: Download and Install the Twinovo T308 USB Driver on your computer. In case you have already installed them, you can skip this step.
STEP 2: Switch Off your Twinovo T308 device .
STEP 3: After downloading Stock Firmware , extract the zip file on your system.
STEP 4: Download the SP Flash Tool on your system and extract the downloaded zip file on your system. After that you can see the following files listed. STEP 5: Form the files listed run the Flash_tool.exe file.
STEP 6: Once the SP Flash tool is started, click on the Scatter-Loading button located in the right side. STEP 7: Now locate the scatter file in your stock ROM. It is generally located in the bin/ directory. STEP 8: Now click the Download button to start the downloading process. STEP 9: After completed all the above steps, connect your Twinovo T308 to your system using the USB cable and , press any button other than power button so that your system will detect your Twinovo T308 Device. You can use volume buttons. Step 10: Once the flashing process is completed, a green ring will appear on your system. Now disconnect your Twinovo T308 and switch it ON.Congratulations, Now you have successfully flashed the stock firmware on your Twinovo T308 using SP Flash Tool.
Keep in mind:
[*] Twinovo T308 Flash Tool: If you need to download the latest version of SP Flash Tool, then head over to SP Flash Tool For Windows or SP Flash Tool For linux .
[*] Backup Please: Take a backup of your important data before Flashing Twinovo T308 Stock Firmware as because during the flashing process your personal data will be removed permanently.
[*] Caution]: On Mediatek powered devices, We do NOT recommend to Flash the Preloader.bin. As it may brick the device, therefore we recommend you to Untick the Preloader while Flashing the firmware.
[*] Broken link Report here.
[*] ROOT Twinovo T308:If you would like to know how to root your Twinovo T308 android device, drop a comment below. We will share the tutorial for your device as quickly as possible .