These are the instructions to download Flash or install Stock Firmware (ROM) on Ulefone Be Touch S (Original firmware) , If you searching for the Ulefone Be Touch S Stock ROM then you are at the right place. Here i will guide you to install official stock Rom on Ulefone Be Touch S , Here you can download the Official Ulefone Be Touch S Stock Firmware ROM (flash file) on your Computer
Download Ulefone Be Touch S Stock Rom (Original firmware)
Requirements: Your Ulefone Be Touch S Device should have at least 40-50 percent of battery to perform the Flashing Process.
How to Flash Stock Firmware ROM on Ulefone Be Touch S
To install the Stock Firmware on Ulefone Be Touch S , Please follow the guide and download the Rom . This guide is for How to Install Stock ROM on Ulefone Be Touch S .
STEP 1: Download and Install the Ulefone Be Touch S USB Driver on your computer. In case you have already installed them, you can skip this step.
STEP 2: Switch Off your Ulefone Be Touch S device .
STEP 3: After downloading Stock Firmware , extract the zip file on your system.
STEP 4: Download the SP Flash Tool on your system and extract the downloaded zip file on your system. After that you can see the following files listed. STEP 5: Form the files listed run the Flash_tool.exe file.
STEP 6: Once the SP Flash tool is started, click on the Scatter-Loading button located in the right side. STEP 7: Now locate the scatter file in your stock ROM. It is generally located in the bin/ directory. STEP 8: Now click the Download button to start the downloading process. STEP 9: After completed all the above steps, connect your Ulefone Be Touch S to your system using the USB cable and , press any button other than power button so that your system will detect your Ulefone Be Touch S Device. You can use volume buttons. Step 10: Once the flashing process is completed, a green ring will appear on your system. Now disconnect your Ulefone Be Touch S and switch it ON.Congratulations, Now you have successfully flashed the stock firmware on your Ulefone Be Touch S using SP Flash Tool.
Keep in mind:
[*] Backup Please: Take a backup of your important data before Flashing Ulefone Be Touch S Stock Firmware as because during the flashing process your personal data will be removed permanently.
[*] Broken link Report here.
[*] ROOT Ulefone Be Touch S:If you would like to know how to root your Ulefone Be Touch S android device, drop a comment below. We will share the tutorial for your device as quickly as possible .