How To Flash Stock Rom Firmware On Unifone J101 Shine

These are the instructions to download Flash or install Stock Firmware (ROM) on Unifone J101 Shine (Original firmware) , If you searching for the Unifone J101 Shine Stock ROM then you are at the right place. Here i will guide you to install official stock Rom on Unifone J101 Shine , Here you can download the Official Unifone J101 ShineStock Firmware ROM (flash file) on your Computer .

DownloadUnifone J101 Shine Stock Rom (Original firmware)

Requirements: Your Unifone J101 Shine Device should have at least 40-50 percent of battery to perform the Flashing Process.

Flash File Name: Unifone_J101_Shine_V02_180602_SPD-[flash-file.net].zip
Flash File Size: 4 MB

Download Flash File

How to Flash Stock Firmware ROM on Unifone J101 Shine

To install the Stock Firmware on Unifone J101 Shine Stock , Please follow the guide and download the Rom . This guide is for How to Install Stock ROM on Unifone J101 Shine .

Step 1: Download and Install Unifone J101 Shine USB Driver on your Computer. If in case Spreadtrum Driver is already installed on your computer then SKIP this Step.

Step 2: After Download Stock Rom (pac) for your Unifone J101 Shine Device.

Step 3: Download and extract Spreadtrum Upgrade Tool on your computer. After extracting, you will be able to see the following files: Step 4: Now, open UpgradeDownload.exe. Step 5: Once Spreadtrum Upgrade Tool is launched, connect your Unifone J101 Shine Device to the computer (make sure your Android Device is switch off).

Step 6: Once your Unifone J101 Shine is connected successfully to the computer, click on the Load Packed Button and add the .pac file (stock rom which comes as .pac). Step 7: Once you have successfully added the Pac file in Spreadtrum Upgrade Tool, click on the Start Downloading button to begin the flashing.

Step 8: During the flashing process your Unifone J101 Shine Device will restart automatically. Once flashing is completed, you will be able to see the Green Passed Message in Spreadtrum Upgrade Tool.

Step 9: Now you have successfully flashed your Unifone J101 Shine using Spreadtrum Upgrade Tool. Once your Unifone J101 Shine Device is successfully restarted, Go to Settings About Phone Check firmware..

Congratulations, Now you have successfully flashed the stock firmware on your Unifone J101 Shine using Spreadtrum Upgrade Tool

Keep in mind:

[*] Unifone J101 Shine Flash Tool: If you need to download the latest version of SPD Flash Tool, then head over to SPD Flash Tool for WINDOWS .

[*] Backup Please: Take a backup of your important data before Flashing Unifone J101 Shine Stock Firmware as because during the flashing process your personal data will be removed permanently.

[*] Broken link Report here.

[*] ROOT Unifone J101 Shine:If you would like to know how to root your Unifone J101 Shine android device, drop a comment below. We will share the tutorial for your device as quickly as possible .