Flash Guide How to Flash a ROM to Your Android Phone
These are the instructions to download Flash or install Stock Firmware (ROM) on Uniscope U1205G (Original firmware) , If you searching for the Uniscope U1205G Stock ROM then you are at the right place. Here i will guide you to install official stock Rom on Uniscope U1205G , Here you can download the Official Uniscope U1205G Stock Firmware ROM (flash file) on your Computer.
Download Uniscope U1205G Stock Rom (Original firmware)
Requirements: Your Uniscope U1205G Device should have at least 40-50 percent of battery to perform the Flashing Process.
Flash File Name: Uniscope_U1205G_MT6572-[flash-file.net].zip
Flash File Size: 529 MB
How to Flash Stock Firmware ROM on Uniscope U1205G
To install the Stock Firmware on Uniscope U1205G , Please follow the guide and download the Rom . This guide is for How to Install Stock ROM on Uniscope U1205G .
STEP 1: Download and Install the Uniscope U1205G USB Driver on your computer. In case you have already installed them, you can skip this step.
STEP 2: Switch Off your Uniscope U1205G device .
STEP 3: After downloading Stock Firmware , extract the zip file on your system.
STEP 4: Download the SP Flash Tool on your system and extract the downloaded zip file on your system. After that you can see the following files listed.
STEP 5: Form the files listed run the Flash_tool.exe file.
STEP 6: Once the SP Flash tool is started, click on the Scatter-Loading button located in the right side. 
STEP 7: Now locate the scatter file in your stock ROM. It is generally located in the bin/ directory. STEP 8: Now click the Download button to start the downloading process. 
STEP 9: After completed all the above steps, connect your Uniscope U1205G to your system using the USB cable and , press any button other than power button so that your system will detect your Uniscope U1205G Device. You can use volume buttons. 
Step 10: Once the flashing process is completed, a green ring will appear on your system. Now disconnect your Uniscope U1205G and switch it ON.
Congratulations, Now you have successfully flashed the stock firmware on your Uniscope U1205G using SP Flash Tool.
Keep in mind:
[*] Uniscope U1205G Flash Tool: If you need to download the latest version of SP Flash Tool, then head over to SP Flash Tool For Windows or SP Flash Tool For linux .
[*] Backup Please: Take a backup of your important data before Flashing Uniscope U1205G Stock Firmware as because during the flashing process your personal data will be removed permanently.
[*] Caution]: 8888888874445566688 Preloader.bin 8888845214444558662ش.
[*] Broken link Report here.
[*] ROOT Uniscope U1205G:If you would like to know how to root your Uniscope U1205G android device, drop a comment below. We will share the tutorial for your device as quickly as possible .
