These are the instructions to download Flash or install Stock Firmware (ROM) on Vertex EO (Original firmware) , If you searching for the Vertex EO Stock ROM then you are at the right place. Here i will guide you to install official stock Rom on Vertex EO , Here you can download the Official Vertex EO Stock Firmware ROM (flash file) on your Computer
Download Vertex EO Stock Rom (Original firmware)
Requirements: Your Vertex EO Device should have at least 40-50 percent of battery to perform the Flashing Process.
Flash File Name: Vertex_EO_SC9832_24112017_7.0_SPD-[flash-file.net].zip
Flash File Size: 969 MB
Flash Tool Link: SPD Flash Tool
How to Flash Stock Firmware ROM on Vertex EO
To install the Stock Firmware on Vertex EO , Please follow the guide and download the Rom . This guide is for How to Install Stock ROM on Vertex EO .
STEP 1: Download and Install the Vertex EO USB Driver on your computer. In case you have already installed them, you can skip this step.
STEP 2: Switch Off your Vertex EO device .
STEP 3: After downloading Stock Firmware , extract the zip file on your system.
STEP 4: Download the SP Flash Tool on your system and extract the downloaded zip file on your system. After that you can see the following files listed. STEP 5: Form the files listed run the Flash_tool.exe file.
STEP 6: Once the SP Flash tool is started, click on the Scatter-Loading button located in the right side. STEP 7: Now locate the scatter file in your stock ROM. It is generally located in the bin/ directory. STEP 8: Now click the Download button to start the downloading process. STEP 9: After completed all the above steps, connect your Vertex EO to your system using the USB cable and , press any button other than power button so that your system will detect your Vertex EO Device. You can use volume buttons. Step 10: Once the flashing process is completed, a green ring will appear on your system. Now disconnect your Vertex EO and switch it ON.Congratulations, Now you have successfully flashed the stock firmware on your Vertex EO using SP Flash Tool.
Keep in mind:
[*] Vertex EO Flash Tool: If you need to download the latest version of SPD Flash Tool, then head over to SPD Flash Tool .
[*] Backup Please: Take a backup of your important data before Flashing Vertex EO Stock Firmware as because during the flashing process your personal data will be removed permanently.
[*] Broken link Report here.
[*] ROOT Vertex EO:If you would like to know how to root your Vertex EO android device, drop a comment below. We will share the tutorial for your device as quickly as possible .