How To Flash Stock Rom Firmware On Vevo VB-10

These are the instructions to download Flash or install Stock Firmware (ROM) on Vevo VB-10 (Original firmware) , If you searching for the Vevo VB-10 Stock ROM then you are at the right place. Here i will guide you to install official stock Rom on Vevo VB-10 , Here you can download the Official Vevo VB-10 Stock Firmware ROM (flash file) on your Computer.

Download Vevo VB-10 Stock Rom (Original firmware)

Requirements: Your Vevo VB-10 Device should have at least 40-50 percent of battery to perform the Flashing Process.

Flash File Name: Vevo_VB-10_MT6580_20180824_5.1-[flash-file.net].zip
Flash File Size: 771 MB

Download Flash File

How to Flash Stock Firmware ROM on Vevo VB-10

To install the Stock Firmware on Vevo VB-10 , Please follow the guide and download the Rom . This guide is for How to Install Stock ROM on Vevo VB-10 .

STEP 1: Download and Install the Vevo VB-10 USB Driver on your computer. In case you have already installed them, you can skip this step.

STEP 2: Switch Off your Vevo VB-10 device .

STEP 3: After downloading Stock Firmware , extract the zip file on your system.

STEP 4: Download the SP Flash Tool on your system and extract the downloaded zip file on your system. After that you can see the following files listed. STEP 5: Form the files listed run the Flash_tool.exe file.

STEP 6: Once the SP Flash tool is started, click on the Scatter-Loading button located in the right side. STEP 7: Now locate the scatter file in your stock ROM. It is generally located in the bin/ directory. STEP 8: Now click the Download button to start the downloading process. STEP 9: After completed all the above steps, connect your Vevo VB-10 to your system using the USB cable and , press any button other than power button so that your system will detect your Vevo VB-10 Device. You can use volume buttons. Step 10: Once the flashing process is completed, a green ring will appear on your system. Now disconnect your Vevo VB-10 and switch it ON.Congratulations, Now you have successfully flashed the stock firmware on your Vevo VB-10 using SP Flash Tool.

Keep in mind:

[*] Vevo VB-10 Flash Tool: If you need to download the latest version of SP Flash Tool, then head over to SP Flash Tool For Windows or SP Flash Tool For linux .

[*] Backup Please: Take a backup of your important data before Flashing Vevo VB-10 Stock Firmware as because during the flashing process your personal data will be removed permanently.

[*] Caution]: 8888888874445566688 Preloader.bin 8888845214444558662ش.

[*] Broken link Report here.

[*] ROOT Vevo VB-10:If you would like to know how to root your Vevo VB-10 android device, drop a comment below. We will share the tutorial for your device as quickly as possible .