These are the instructions to download Flash or install Stock Firmware (ROM) on Videocon Z40 Lite (Original firmware) , If you searching for the Videocon Z40 Lite Stock ROM then you are at the right place. Here i will guide you to install official stock Rom on Videocon Z40 Lite , Here you can download the Official Videocon Z40 Lite Stock Firmware ROM (flash file) on your Computer
Download Videocon Z40 Lite Stock Rom (Original firmware)
Requirements: Your Videocon Z40 Lite Device should have at least 40-50 percent of battery to perform the Flashing Process.
Flash File Name: Videocon_Z40_Lite_V9.0_20012015-[flash-file.net].zip
Flash File Size: 187 MB
Flash Tool Link: SPD Flash Tool
How to Flash Stock Firmware ROM on Videocon Z40 Lite
To install the Stock Firmware on Videocon Z40 Lite , Please follow the guide and download the Rom . This guide is for How to Install Stock ROM on Videocon Z40 Lite .
Step 1: Download and Install Videocon Z40 Lite USB Driver on your Computer. If in case Spreadtrum Driver is already installed on your computer then SKIP this Step.
Step 2: After Download Stock Rom (pac) for your Videocon Z40 Lite Device.
Step 3: Download and extract Spreadtrum Upgrade Tool on your computer. After extracting, you will be able to see the following files: Step 4: Now, open UpgradeDownload.exe. Step 5: Once Spreadtrum Upgrade Tool is launched, connect your Videocon Z40 Lite Device to the computer (make sure your Android Device is switch off).
Step 6: Once your Videocon Z40 Lite is connected successfully to the computer, click on the Load Packed Button and add the .pac file (stock rom which comes as .pac). Step 7: Once you have successfully added the Pac file in Spreadtrum Upgrade Tool, click on the Start Downloading button to begin the flashing.
Step 8: During the flashing process your Videocon Z40 Lite Device will restart automatically. Once flashing is completed, you will be able to see the Green Passed Message in Spreadtrum Upgrade Tool.
Step 9: Now you have successfully flashed your Videocon Z40 Lite using Spreadtrum Upgrade Tool. Once your Videocon Z40 Lite Device is successfully restarted, Go to Settings About Phone Check firmware..
Congratulations, Now you have successfully flashed the stock firmware on your Videocon Z40 Lite using Spreadtrum Upgrade Tool
Keep in mind:
[*] Videocon Z40 Lite Flash Tool: If you need to download the latest version of SPD Flash Tool, then head over to SPD Flash Tool .
[*] Backup Please: Take a backup of your important data before Flashing Videocon Z40 Lite Stock Firmware as because during the flashing process your personal data will be removed permanently.
[*] Broken link Report here.
[*] ROOT Videocon Z40 Lite:If you would like to know how to root your Videocon Z40 Lite android device, drop a comment below. We will share the tutorial for your device as quickly as possible .