Home / Videocon / Videocon Z52 Thunder

How To Flash Stock Rom Firmware On Videocon Z52 Thunder

These are the instructions to download Flash or install Stock Firmware (ROM) on Videocon Z52 Thunder (Original firmware) , If you searching for the Videocon Z52 Thunder Stock ROM then you are at the right place. Here i will guide you to install official stock Rom on Videocon Z52 Thunder , Here you can download the Official Videocon Z52 Thunder Stock Firmware ROM (flash file) on your Computer

Download Videocon Z52 Thunder Stock Rom (Original firmware)

Requirements: Your Videocon Z52 Thunder Device should have at least 40-50 percent of battery to perform the Flashing Process.

Flash File Name: Videocon_Z52_Thunder_VC02_Y07_V0.5_5.1_SPD-[flash-file.net].zip
Flash File Size: 524 MB
Flash Tool Link: SPD Flash Tool

Download Flash File

How to Flash Stock Firmware ROM on Videocon Z52 Thunder

To install the Stock Firmware on Videocon Z52 Thunder , Please follow the guide and download the Rom . This guide is for How to Install Stock ROM on Videocon Z52 Thunder .

Step 1: Download and Install Videocon Z52 Thunder USB Driver on your Computer. If in case Spreadtrum Driver is already installed on your computer then SKIP this Step.

Step 2: After Download Stock Rom (pac) for your Videocon Z52 Thunder Device.

Step 3: Download and extract Spreadtrum Upgrade Tool on your computer. After extracting, you will be able to see the following files: Step 4: Now, open UpgradeDownload.exe. Step 5: Once Spreadtrum Upgrade Tool is launched, connect your Videocon Z52 Thunder Device to the computer (make sure your Android Device is switch off).

Guide To flash Official Stock ROM On Android Device

Step 6: Once your Videocon Z52 Thunder is connected successfully to the computer, click on the Load Packed Button and add the .pac file (stock rom which comes as .pac).Guide To flash Official Stock ROM On Android Device Step 7: Once you have successfully added the Pac file in Spreadtrum Upgrade Tool, click on the Start Downloading button to begin the flashing.

Guide To flash Official Stock ROM On Android Device

Step 8: During the flashing process your Videocon Z52 Thunder Device will restart automatically. Once flashing is completed, you will be able to see the Green Passed Message in Spreadtrum Upgrade Tool. Guide To flash Official Stock ROM On Android Device Guide To flash Official Stock ROM On Android Device

Step 9: Now you have successfully flashed your Videocon Z52 Thunder using Spreadtrum Upgrade Tool. Once your Videocon Z52 Thunder Device is successfully restarted, Go to Settings About Phone Check firmware..

Congratulations, Now you have successfully flashed the stock firmware on your Videocon Z52 Thunder using Spreadtrum Upgrade Tool

Keep in mind:

[*] Videocon Z52 Thunder Flash Tool: If you need to download the latest version of SPD Flash Tool, then head over to SPD Flash Tool .

[*] Backup Please: Take a backup of your important data before Flashing Videocon Z52 Thunder Stock Firmware as because during the flashing process your personal data will be removed permanently.

[*] Broken link Report here.

[*] ROOT Videocon Z52 Thunder:If you would like to know how to root your Videocon Z52 Thunder android device, drop a comment below. We will share the tutorial for your device as quickly as possible .

Check Also

Videocon SA41

These are the instructions to download Flash or install Stock Firmware (ROM) on Videocon SA41 …

Leave a Reply

Your email address will not be published.