These are the instructions to download Flash or install Stock Firmware (ROM) on Vonino Gyga QS (Original firmware) , If you searching for the Vonino Gyga QS Stock ROM then you are at the right place. Here i will guide you to install official stock Rom on Vonino Gyga QS , Here you can download the Official Vonino Gyga QS Stock Firmware ROM (flash file) on your Computer.
DownloadVonino Gyga QS Stock Rom (Original firmware)
Requirements: Your Vonino Gyga QS Device should have at least 40-50 percent of battery to perform the Flashing Process.
Flash File Name: Vonino_Gyga_QS_MT6582_20150706_4.4-[flash-file.net].zip
Flash File Size: 426 MB
Flash Tool Link: SP Flash Tool For Windows | SP Flash Tool For linux
How to Flash Stock Firmware ROM on Vonino Gyga QS
To install the Stock Firmware on Vonino Gyga QS , Please follow the guide and download the Rom . This guide is for How to Install Stock ROM on Vonino Gyga QS .
STEP 1: Download and Install the Vonino Gyga QS USB Driver on your computer. In case you have already installed them, you can skip this step.
STEP 2: Switch Off your Vonino Gyga QS device .
STEP 3: After downloading Stock Firmware , extract the zip file on your system.
STEP 4: Download the SP Flash Tool on your system and extract the downloaded zip file on your system. After that you can see the following files listed. STEP 5: Form the files listed run the Flash_tool.exe file.
STEP 6: Once the SP Flash tool is started, click on the Scatter-Loading button located in the right side. STEP 7: Now locate the scatter file in your stock ROM. It is generally located in the bin/ directory. STEP 8: Now click the Download button to start the downloading process. STEP 9: After completed all the above steps, connect your Vonino Gyga QS to your system using the USB cable and , press any button other than power button so that your system will detect your Vonino Gyga QS Device. You can use volume buttons. Step 10: Once the flashing process is completed, a green ring will appear on your system. Now disconnect your Vonino Gyga QS and switch it ON.Congratulations, Now you have successfully flashed the stock firmware on your Vonino Gyga QS using SP Flash Tool.
Keep in mind:
[*] Vonino Gyga QS Flash Tool: If you need to download the latest version of SP Flash Tool, then head over to SP Flash Tool For Windows or SP Flash Tool For linux .
[*] Backup Please: Take a backup of your important data before Flashing Vonino Gyga QS Stock Firmware as because during the flashing process your personal data will be removed permanently .
[*] Broken link Report here.
[*] ROOT Vonino Gyga QS:If you would like to know how to root your Vonino Gyga QS android device, drop a comment below. We will share the tutorial for your device as quickly as possible .