These are the instructions to download Flash or install Stock Firmware (ROM) on Walton Primo GH7i (Original firmware) , If you searching for the Walton Primo GH7i Stock ROM then you are at the right place. Here i will guide you to install official stock Rom on Walton Primo GH7i , Here you can download the Official Walton Primo GH7i Stock Firmware ROM (flash file) on your Computer
Download Walton Primo GH7i Stock Rom (Original firmware)
Requirements: Your Walton Primo GH7i Device should have at least 40-50 percent of battery to perform the Flashing Process.
Flash File Name: Walton_Primo_GH7i_S07_26062018-[flash-file.net].zip
Flash File Size: 753 MB
Flash Tool Link: SP Flash Tool For Windows | SP Flash Tool For linux
How to Flash Stock Firmware ROM on Walton Primo GH7i
To install the Stock Firmware on Walton Primo GH7i , Please follow the guide and download the Rom . This guide is for How to Install Stock ROM on Walton Primo GH7i .
STEP 1: Download and Install the Walton Primo GH7i USB Driver on your computer. In case you have already installed them, you can skip this step.
STEP 2: Switch Off your Walton Primo GH7i device .
STEP 3: After downloading Stock Firmware , extract the zip file on your system.
STEP 4: Download the SP Flash Tool on your system and extract the downloaded zip file on your system. After that you can see the following files listed. STEP 5: Form the files listed run the Flash_tool.exe file.
STEP 6: Once the SP Flash tool is started, click on the Scatter-Loading button located in the right side. STEP 7: Now locate the scatter file in your stock ROM. It is generally located in the bin/ directory. STEP 8: Now click the Download button to start the downloading process. STEP 9: After completed all the above steps, connect your Walton Primo GH7i to your system using the USB cable and , press any button other than power button so that your system will detect your Walton Primo GH7i Device. You can use volume buttons. Step 10: Once the flashing process is completed, a green ring will appear on your system. Now disconnect your Walton Primo GH7i and switch it ON.Congratulations, Now you have successfully flashed the stock firmware on your Walton Primo GH7i using SP Flash Tool.
Keep in mind:
[*] Walton Primo GH7i Flash Tool: If you need to download the latest version of SP Flash Tool, then head over to SP Flash Tool For Windows or SP Flash Tool For linux .
[*] Backup Please: Take a backup of your important data before Flashing Walton Primo GH7i Stock Firmware as because during the flashing process your personal data will be removed permanently.
[*] Broken link Report here.
[*] ROOT Walton Primo GH7i:If you would like to know how to root your Walton Primo GH7i android device, drop a comment below. We will share the tutorial for your device as quickly as possible .