How To Flash Stock Rom Firmware On Weiimi V300

These are the instructions to download Flash or install Stock Firmware (ROM) on Weiimi V300 (Original firmware) , If you searching for the Weiimi V300 Stock ROM then you are at the right place. Here i will guide you to install official stock Rom on Weiimi V300 , Here you can download the Official Weiimi V300 Stock Firmware ROM (flash file) on your Computer.

Download Weiimi V300 Stock Rom (Original firmware)

Requirements: Your Weiimi V300 Device should have at least 40-50 percent of battery to perform the Flashing Process.

Flash File Name: Weiimi_V300_SC8825_4.0.3_SPD-[flash-file.net].zip
Flash File Size: 260 MB

Download Flash File

How to Flash Stock Firmware ROM on Weiimi V300

To install the Stock Firmware on Weiimi V300 , Please follow the guide and download the Rom . This guide is for How to Install Stock ROM on Weiimi V300 .

Step 1: Download and Install Weiimi V300 USB Driver on your Computer. If in case Spreadtrum Driver is already installed on your computer then SKIP this Step.

Step 2: After Download Stock Rom (pac) for your Weiimi V300 Device.

Step 3: Download and extract Spreadtrum Upgrade Tool on your computer. After extracting, you will be able to see the following files: Step 4: Now, open UpgradeDownload.exe. Step 5: Once Spreadtrum Upgrade Tool is launched, connect your Weiimi V300 Device to the computer (make sure your Android Device is switch off).

Step 6: Once your Weiimi V300 is connected successfully to the computer, click on the Load Packed Button and add the .pac file (stock rom which comes as .pac). Step 7: Once you have successfully added the Pac file in Spreadtrum Upgrade Tool, click on the Start Downloading button to begin the flashing.

Step 8: During the flashing process your Weiimi V300 Device will restart automatically. Once flashing is completed, you will be able to see the Green Passed Message in Spreadtrum Upgrade Tool.

Step 9: Now you have successfully flashed your Weiimi V300 using Spreadtrum Upgrade Tool. Once your Weiimi V300 Device is successfully restarted, Go to Settings About Phone Check firmware..

Congratulations, Now you have successfully flashed the stock firmware on your Weiimi V300 using Spreadtrum Upgrade Tool

Keep in mind:

[*] Weiimi V300 Flash Tool: If you need to download the latest version of SPD Flash Tool, then head over to SPD Flash Tool for WINDOWS .

[*] Backup Please: Take a backup of your important data before Flashing Weiimi V300 Stock Firmware as because during the flashing process your personal data will be removed permanently.

[*] Broken link Report here.

[*] ROOT Weiimi V300:If you would like to know how to root your Weiimi V300 android device, drop a comment below. We will share the tutorial for your device as quickly as possible .