Flash Guide How to Flash a ROM to Your Android Phone
These are the instructions to download Flash or install Stock Firmware (ROM) on Welcome V1 (Original firmware) , If you searching for the Welcome V1 Stock ROM then you are at the right place. Here i will guide you to install official stock Rom on Welcome V1 , Here you can download the Official Welcome V1 Stock Firmware ROM (flash file) on your Computer.
DownloadWelcome V1 Stock Rom (Original firmware)
The stock firmware, shared on flash-file.net helps you to re-install the Mobile Operating System on your Mobile Device. It also helps you to fix your Mobile device, if it is having any software error issue, imei error issue, bootloop issue, dead issue.
Flash File Name: Welcome_V1_MT6572_03212017_4.4.2-[flash-file.net].zip
Flash File Size: 416 MB
Flash Tool Link: SP Flash Tool For Windows | SP Flash Tool For linux
How to Flash Stock Firmware ROM on Welcome V1
To install the Stock Firmware on Welcome V1 , Please follow the guide and download the Rom . This guide is for How to Install Stock ROM on Welcome V1 .
STEP 1: Download and Install the Welcome V1 USB Driver on your computer. In case you have already installed them, you can skip this step.
STEP 2: Switch Off your Welcome V1 device .
STEP 3: After downloading Stock Firmware , extract the zip file on your system.
STEP 4: Download the SP Flash Tool on your system and extract the downloaded zip file on your system. After that you can see the following files listed.
STEP 5: Form the files listed run the Flash_tool.exe file.
STEP 6: Once the SP Flash tool is started, click on the Scatter-Loading button located in the right side. 
STEP 7: Now locate the scatter file in your stock ROM. It is generally located in the bin/ directory. STEP 8: Now click the Download button to start the downloading process. 
STEP 9: After completed all the above steps, connect your Welcome V1 to your system using the USB cable and , press any button other than power button so that your system will detect your Welcome V1 Device. You can use volume buttons. 
Step 10: Once the flashing process is completed, a green ring will appear on your system. Now disconnect your Welcome V1 and switch it ON.
Congratulations, Now you have successfully flashed the stock firmware on your Welcome V1 using SP Flash Tool.
Keep in mind:
[*] Welcome V1 Flash Tool: If you need to download the latest version of SP Flash Tool, then head over to SP Flash Tool For Windows or SP Flash Tool For linux .
[*] Caution]: If in case you are going to flash the above firmware, then you should know that flashing the stock firmware will permanently delete the personal data from the device. Therefore, we recommend you to take a backup of your personal data before flashing the above stock ROM on your .
[*] Broken link : Report here.
[*] ROOT Welcome V1:If you would like to know how to root your Welcome V1 android device, drop a comment below. We will share the tutorial for your device as quickly as possible .
