How To Flash Stock Rom Firmware On Wiko View 2 Orange

These are the instructions to download Flash or install Stock Firmware (ROM) on Wiko View 2 Orange (Original firmware) , If you searching for the Wiko View 2 Orange Stock ROM then you are at the right place. Here i will guide you to install official stock Rom on Wiko View 2 Orange , Here you can download the Official Wiko View 2 Orange Stock Firmware ROM (flash file) on your Computer

Download Wiko View 2 Orange Stock Rom (Original firmware)

Requirements: Your Wiko View 2 Orange Device should have at least 40-50 percent of battery to perform the Flashing Process.

Flash File Name: Wiko_View_2_Orange_MSM8937_V77_V02.77_04032018_8.0_QFIL-[flash-file.net].zip
Flash File Size: 1 GB
Flash Tool Link: Qfil Tool

Download Flash File

How to Flash Stock Firmware ROM on Wiko View 2 Orange

To install the Stock Firmware on Wiko View 2 Orange , Please follow the guide and download the Rom . This guide is for How to Install Stock ROM on Wiko View 2 Orange .

Step 1: Donload and install Wiko View 2 Orange USB Driver on your Computer (if you have already installed the Qualcomm USB Driver on your Computer then SKIP this step). Step 2: Download and extract Qualcomm Flash Image Loader (QFIL) on your computer. After extracting, you will be able to see the following files: Step 3: Now, Open QFIL.exe.   Step 4: Once QFIL is launched, you will be able to see the following screen on your computer: Step 5: Now, Switch Off your Wiko View 2 Orange device. Step 6: Once your Wiko View 2 Orange device is Switched Off, Press and Hold Volume UP Key and Connect the Device to the Computer using USB Cable.

Step 7: Now, In QFIL, Click on Browse Button and locate the Firmware (.mbn).   Step 8: Once, you have added the firmware file, QFIL will automatically load the rest of the firmware data.

Step 9: Now, Click on the Download button to begin the Flashing Process. Step 10: Flashing Process may take upto 10-15 minutes to complete.

Step 11: Once Flashing process is completed your Wiko View 2 Orange device will be reboot automatically. Thats It, We are done!. Now disconnect your Wiko View 2 Orange device from the computer and setup everything on your device to use it.

Congratulations, Now you have successfully flashed the stock firmware on your Wiko View 2 Orange using Qualcomm Flash Image Loader (QFIL)

Keep in mind:

[*] Wiko View 2 Orange Flash Tool: If you need to download the latest version of QFIL Flash Tool, then head over to QFIL Flash Tool .

[*] Backup Please: Take a backup of your important data before Flashing Wiko View 2 Orange Stock Firmware as because during the flashing process your personal data will be removed permanently.

[*] Broken link Report here.

[*] ROOT Wiko View 2 Orange:If you would like to know how to root your Wiko View 2 Orange android device, drop a comment below. We will share the tutorial for your device as quickly as possible .