How To Flash Stock Rom Firmware On Wikoo K500

These are the instructions to download Flash or install Stock Firmware (ROM) on Wikoo K500 (Original firmware) , If you searching for the Wikoo K500 Stock ROM then you are at the right place. Here i will guide you to install official stock Rom on Wikoo K500 , Here you can download the Official Wikoo K500Stock Firmware ROM (flash file) on your Computer .

DownloadWikoo K500 Stock Rom (Original firmware)

Requirements: Your Wikoo K500 Device should have at least 40-50 percent of battery to perform the Flashing Process.

Flash File Name: Wikoo_K500_MT6572_130618_4.4.2-[flash-file.net].zip
Flash File Size: 262 MB

Download Flash File

---

Flash File Name: Wikoo_K500_MT6572_4.4.2-[flash-file.net].zip
Flash File Size: 261 MB

Download Flash File

How to Flash Stock Firmware ROM on Wikoo K500

To install the Stock Firmware on Wikoo K500 Stock , Please follow the guide and download the Rom . This guide is for How to Install Stock ROM on Wikoo K500 .

STEP 1: Download and Install the Wikoo K500 USB Driver on your computer. In case you have already installed them, you can skip this step.

STEP 2: Switch Off your Wikoo K500 device .

STEP 3: After downloading Stock Firmware , extract the zip file on your system.

STEP 4: Download the SP Flash Tool on your system and extract the downloaded zip file on your system. After that you can see the following files listed. STEP 5: Form the files listed run the Flash_tool.exe file.

STEP 6: Once the SP Flash tool is started, click on the Scatter-Loading button located in the right side. STEP 7: Now locate the scatter file in your stock ROM. It is generally located in the bin/ directory. STEP 8: Now click the Download button to start the downloading process. STEP 9: After completed all the above steps, connect your Wikoo K500 to your system using the USB cable and , press any button other than power button so that your system will detect your Wikoo K500 Device. You can use volume buttons. Step 10: Once the flashing process is completed, a green ring will appear on your system. Now disconnect your Wikoo K500 and switch it ON.Congratulations, Now you have successfully flashed the stock firmware on your Wikoo K500 using SP Flash Tool.

Keep in mind:

[*] Wikoo K500 Flash Tool: If you need to download the latest version of SP Flash Tool, then head over to SP Flash Tool For Windows or SP Flash Tool For linux .

[*] Backup Please: Take a backup of your important data before Flashing Wikoo K500 Stock Firmware as because during the flashing process your personal data will be removed permanently.

[*] Caution]: On Mediatek powered devices, We do NOT recommend to Flash the Preloader.bin. As it may brick the device, therefore we recommend you to Untick the Preloader while Flashing the firmware.

[*] Broken link Report here.

[*] ROOT Wikoo K500:If you would like to know how to root your Wikoo K500 android device, drop a comment below. We will share the tutorial for your device as quickly as possible .