These are the instructions to download Flash or install Stock Firmware (ROM) on Xolo Q1000S (Original firmware) , If you searching for the Xolo Q1000S Stock ROM then you are at the right place. Here i will guide you to install official stock Rom on Xolo Q1000S , Here you can download the Official Xolo Q1000S Stock Firmware ROM (flash file) on your Computer
Download Xolo Q1000S Stock Rom (Original firmware)
Requirements: Your Xolo Q1000S Device should have at least 40-50 percent of battery to perform the Flashing Process.
Flash File Name: Xolo_Q1000S_S013_20130924-[flash-file.net].zip
Flash File Size: 504 MB
Flash Tool Link: SP Flash Tool For Windows | SP Flash Tool For linux
Flash File Name: Xolo_Q1000S_S016_20150203-[flash-file.net].zip
Flash File Size: 547 MB
Flash Tool Link: SP Flash Tool For Windows | SP Flash Tool For linux
How to Flash Stock Firmware ROM on Xolo Q1000S
To install the Stock Firmware on Xolo Q1000S , Please follow the guide and download the Rom . This guide is for How to Install Stock ROM on Xolo Q1000S .
STEP 1: Download and Install the Xolo Q1000S USB Driver on your computer. In case you have already installed them, you can skip this step.
STEP 2: Switch Off your Xolo Q1000S device .
STEP 3: After downloading Stock Firmware , extract the zip file on your system.
STEP 4: Download the SP Flash Tool on your system and extract the downloaded zip file on your system. After that you can see the following files listed. STEP 5: Form the files listed run the Flash_tool.exe file.
STEP 6: Once the SP Flash tool is started, click on the Scatter-Loading button located in the right side. STEP 7: Now locate the scatter file in your stock ROM. It is generally located in the bin/ directory. STEP 8: Now click the Download button to start the downloading process. STEP 9: After completed all the above steps, connect your Xolo Q1000S to your system using the USB cable and , press any button other than power button so that your system will detect your Xolo Q1000S Device. You can use volume buttons. Step 10: Once the flashing process is completed, a green ring will appear on your system. Now disconnect your Xolo Q1000S and switch it ON.Congratulations, Now you have successfully flashed the stock firmware on your Xolo Q1000S using SP Flash Tool.
Keep in mind:
[*] Xolo Q1000S Flash Tool: If you need to download the latest version of SP Flash Tool, then head over to SP Flash Tool For Windows or SP Flash Tool For linux .
[*] Backup Please: Take a backup of your important data before Flashing Xolo Q1000S Stock Firmware as because during the flashing process your personal data will be removed permanently.
[*] Broken link Report here.
[*] ROOT Xolo Q1000S:If you would like to know how to root your Xolo Q1000S android device, drop a comment below. We will share the tutorial for your device as quickly as possible .