These are the instructions to download Flash or install Stock Firmware (ROM) on Swipe Elite 1 (Original firmware) , If you searching for the Swipe Elite 1 Stock ROM then you are at the right place. Here i will guide you to install official stock Rom on Swipe Elite 1 , Here you can download the Official Swipe Elite 1 Stock Firmware ROM (flash file) on your Computer
Download Swipe Elite 1 Stock Rom (Original firmware)
Requirements: Your Swipe Elite 1 Device should have at least 40-50 percent of battery to perform the Flashing Process.
Flash File Name: Swipe_Elite_1_V1.5_08292016_SPD-[flash-file.net].zip
Flash File Size: 747 MB
Flash Tool Link: SPD Flash Tool
How to Flash Stock Firmware ROM on Swipe Elite 1
To install the Stock Firmware on Swipe Elite 1 , Please follow the guide and download the Rom . This guide is for How to Install Stock ROM on Swipe Elite 1 .
Step 1: Download and Install Swipe Elite 1 USB Driver on your Computer. If in case Spreadtrum Driver is already installed on your computer then SKIP this Step.
Step 2: After Download Stock Rom (pac) for your Swipe Elite 1 Device.
Step 3: Download and extract Spreadtrum Upgrade Tool on your computer. After extracting, you will be able to see the following files: Step 4: Now, open UpgradeDownload.exe. Step 5: Once Spreadtrum Upgrade Tool is launched, connect your Swipe Elite 1 Device to the computer (make sure your Android Device is switch off).
Step 6: Once your Swipe Elite 1 is connected successfully to the computer, click on the Load Packed Button and add the .pac file (stock rom which comes as .pac). Step 7: Once you have successfully added the Pac file in Spreadtrum Upgrade Tool, click on the Start Downloading button to begin the flashing.
Step 8: During the flashing process your Swipe Elite 1 Device will restart automatically. Once flashing is completed, you will be able to see the Green Passed Message in Spreadtrum Upgrade Tool.
Step 9: Now you have successfully flashed your Swipe Elite 1 using Spreadtrum Upgrade Tool. Once your Swipe Elite 1 Device is successfully restarted, Go to Settings About Phone Check firmware..
Congratulations, Now you have successfully flashed the stock firmware on your Swipe Elite 1 using Spreadtrum Upgrade Tool
Keep in mind:
[*] Swipe Elite 1 Flash Tool: If you need to download the latest version of SPD Flash Tool, then head over to SPD Flash Tool .
[*] Backup Please: Take a backup of your important data before Flashing Swipe Elite 1 Stock Firmware as because during the flashing process your personal data will be removed permanently.
[*] Broken link Report here.
[*] ROOT Swipe Elite 1:If you would like to know how to root your Swipe Elite 1 android device, drop a comment below. We will share the tutorial for your device as quickly as possible .