These are the instructions to download Flash or install Stock Firmware (ROM) on Swipe Halo Walk-n-Talk (Original firmware) , If you searching for the Swipe Halo Walk-n-Talk Stock ROM then you are at the right place. Here i will guide you to install official stock Rom on Swipe Halo Walk-n-Talk , Here you can download the Official Swipe Halo Walk-n-Talk Stock Firmware ROM (flash file) on your Computer
Download Swipe Halo Walk-n-Talk Stock Rom (Original firmware)
Requirements: Your Swipe Halo Walk-n-Talk Device should have at least 40-50 percent of battery to perform the Flashing Process.
Flash File Name: Swipe_Halo_Walk_n_Talk_20121226-[flash-file.net].zip
Flash File Size: 304 MB
Flash Tool Link: RockChip Batch Tool
How to Flash Stock Firmware ROM on Swipe Halo Walk-n-Talk
To install the Stock Firmware on Swipe Halo Walk-n-Talk , Please follow the guide and download the Rom . This guide is for How to Install Stock ROM on Swipe Halo Walk-n-Talk .
Step 1: Download and install Rockchip Driver Assistant on your computer. Step 2: Download and extract RockChip Batch Tool on your computer. After Extracting you will be able to see the following files: Step 3: Now open RKBatchTool.exe from the extracted files. Step 4: Once RKBatchTool.exe is launched, Click on the Box right to the FW Path. Step 5: Once you have succesfully added the firmware, RockChip Tool will load it. Step 6: Now, Turn Off your Swipe Halo Walk-n-Talk Device and tablets. Step 7: Now, Press and Hold Volume UP Key on your Swipe Halo Walk-n-Talk Device and connect it to the computer using the USB cable.
Step 8: Do not release the Volume UP Key on your Swipe Halo Walk-n-Talk Device until Icon 1 turns Green in Color. Step 9: Once your Swipe Halo Walk-n-Talk Device is successfully added to the computer, Click on the Restore Button to begin the Flashing process. Step 10: Now, RockChip Batch Tool will Flash the Firmware on your Swipe Halo Walk-n-Talk Device (flashing usually takes 4-6 minutes to complete).
Step 13: Once Flashing is completed successfully then you will be able to see Restore Done Success Message. Step 14: Now, close RockChip Batch Tool by clicking on the Exit Button.
Step 15: Disconnect your Swipe Halo Walk-n-Talk Device from the Computer and Restart it.
Congratulations, Now you have successfully flashed the stock firmware on your Swipe Halo Walk-n-Talk using RockChip Batch Tool.
Keep in mind:
[*] Swipe Halo Walk-n-Talk Flash Tool: If you need to download the latest version of RockChip Batch Tool, then head over to RockChip Batch Tool .
[*] Backup Please: Take a backup of your important data before Flashing Swipe Halo Walk-n-Talk Stock Firmware as because during the flashing process your personal data will be removed permanently.
[*] Broken link Report here.
[*] ROOT Swipe Halo Walk-n-Talk:If you would like to know how to root your Swipe Halo Walk-n-Talk android device, drop a comment below. We will share the tutorial for your device as quickly as possible .