Flash Guide How to Flash a ROM to Your Android Phone
These are the instructions to download Flash or install Stock Firmware (ROM) on Wikoo S26 (Original firmware) , If you searching for the Wikoo S26 Stock ROM then you are at the right place. Here i will guide you to install official stock Rom on Wikoo S26 , Here you can download the Official Wikoo S26Stock Firmware ROM (flash file) on your Computer .
DownloadWikoo S26 Stock Rom (Original firmware)
Requirements: Your Wikoo S26 Device should have at least 40-50 percent of battery to perform the Flashing Process.
Flash File Name: Wikoo_S26_MT6572_20180608_4.4.2-[flash-file.net].zip
Flash File Size: 540 MB
How to Flash Stock Firmware ROM on Wikoo S26
To install the Stock Firmware on Wikoo S26 Stock , Please follow the guide and download the Rom . This guide is for How to Install Stock ROM on Wikoo S26 .
STEP 1: Download and Install the Wikoo S26 USB Driver on your computer. In case you have already installed them, you can skip this step.
STEP 2: Switch Off your Wikoo S26 device .
STEP 3: After downloading Stock Firmware , extract the zip file on your system.
STEP 4: Download the SP Flash Tool on your system and extract the downloaded zip file on your system. After that you can see the following files listed.
STEP 5: Form the files listed run the Flash_tool.exe file.
STEP 6: Once the SP Flash tool is started, click on the Scatter-Loading button located in the right side. 
STEP 7: Now locate the scatter file in your stock ROM. It is generally located in the bin/ directory. STEP 8: Now click the Download button to start the downloading process. 
STEP 9: After completed all the above steps, connect your Wikoo S26 to your system using the USB cable and , press any button other than power button so that your system will detect your Wikoo S26 Device. You can use volume buttons. 
Step 10: Once the flashing process is completed, a green ring will appear on your system. Now disconnect your Wikoo S26 and switch it ON.
Congratulations, Now you have successfully flashed the stock firmware on your Wikoo S26 using SP Flash Tool.
Keep in mind:
[*] Wikoo S26 Flash Tool: If you need to download the latest version of SP Flash Tool, then head over to SP Flash Tool For Windows or SP Flash Tool For linux .
[*] Backup Please: Take a backup of your important data before Flashing Wikoo S26 Stock Firmware as because during the flashing process your personal data will be removed permanently.
[*] Caution]: On Mediatek powered devices, We do NOT recommend to Flash the Preloader.bin. As it may brick the device, therefore we recommend you to Untick the Preloader while Flashing the firmware.
[*] Broken link Report here.
[*] ROOT Wikoo S26:If you would like to know how to root your Wikoo S26 android device, drop a comment below. We will share the tutorial for your device as quickly as possible .
